For a long time, H7 has been a relatively special presence among headlight types, often causing headaches for car owners who want to replace H7 LED bulbs. In some cases, car owners need to remove the LED socket and fix it with the original car's spring clip, and then insert the LED Bulb. In many cases, car owners are facing a complex mechanical structure: they need an additional adapter to connect the LED socket and replace the original special adapter of the car to install the LED light smoothly.
Even if they complete this step, the installation result may not be satisfactory. LASFIT's PRO-MB1 LED bulb has been optimized for car owners who want to upgrade to H7 LED Bulbs. This article will fully present the installation and adaptation effects of Pro-MB1 LED bulb to readers, hoping to provide help for your selection and installation.
In fact, we have also developed different universal adapters. However, many customers still say that the universal adapter is not suitable for LED bulbs, or the adapter is very loose or even falls off after being connected to the bulb and installed on the assembly. This is not an excellent product experience.
We decided to redesign customized LED bulbs, reduce the complexity of installation through integrated design, and improve the adaptability after installation.
The comparison between the combination of universal LED bulb and Pro-MB1 LED bulb
The special adapter integrates an H7 mounting plate and bracket that can be removed while ensuring a tight installation of the LED bulb on the car assembly.
In fact, we have also developed different universal adapters. However, many customers still say that the universal adapter is not suitable for LED bulbs, or the adapter is very loose or even falls off after being connected to the bulb and installed on the assembly. This is not an excellent product experience.
We decided to redesign customized LED bulbs, reduce the complexity of installation through integrated design, and improve the adaptability after installation.
The comparison between the combination of universal LED bulb and Pro-MB1 LED bulb
The special adapter integrates an H7 mounting plate and bracket that can be removed while ensuring a tight installation of the LED bulb on the car assembly.
Matching LED light adapters found for the specific vehicle model.
Insert the adapter into the LED light body and connect it to the LED light collar.
Insert the connected LED light into the housing.
LED light is still loose after insertion.
Demonstrate the stability of the LED light by inserting it directly and letting go of it.
A comparison picture: Customized bulb installation process is easy and the installation result is stable.
With the new custom design, we came up with the best solution for a hassle-free installation that guarantees you can finish the bulbs replacement by yourself. No worry about the loose installation or can’t find the right way to make the adapter locked tightly in the housing. We redesigned the adapter to make a perfect fit. You just need to take out the OEM adapter and install ours. They allow you to have a simple and fast installation within 10-15 minutes.
No error code, no flickering. All you need to do is remove the old halogen bulb and plug in the new Lasfit Pro-MB1 LED light bulb. We made it simple, the way it should have always been.
60w/set, 6000lm/set, 6000k crystal white. 400% brighter than halogen one. Huge improvement than the stock bulb. No need to spend time adjusting the light pattern. It's already the best orientation.
Lasfit designed several other special H7 LED bulbs for some models of Mercedes-Benz, Volkswagen, Hyundai and Kia. If your OEM H7 retainer holder is one of these types, please click the link to enter the official website for purchasing.
💭Questions or Comments? Leave them below!