0

Your Cart is Empty

Pro Series H7 LED Bulbs w/Retainer Adapter For Volkswagen Passat 2012-2015 | 2 Bulbs

SKU#:Pro-VW-01+T75

Important Notice:
• Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.

• Please leave your vehicle make/model/year to cart before place the order, so we can provide follow-up support to you better in the future.

TYPE

  • IMPORTANT INFORMATION:
    For Volkswagen Passat, the factory dust cover could not go back on the housing after installing this Pro series H7 LED bulb, which needs Lasfit aftermarket 75mm dust coverSecondly, this light comes with a resistor that may be too big to fit in the lamp housing, it needs to trim the aftermarket dust cover a bit and let the cable out.
    And we suggest you use zip ties to mount the resister to the vehicle frame.
    If you do mind, we suggest do not purchase this product.

     

    DESCRIPTION:

    Designed to replace factory H7 halogen bulbs and H7 adapter in high forward lights of 2012-2015 Volkswagen Passat. These custom design Pro-VW-01 LED bulbs are born for those who are eager to get a new pair of bright white LED bulbs with 100% compatible fitment for their Passat to improve night driving.

     

    COMPATIBILITY:

    Fit For 2012 Volkswagen Passat Bright Light
    Fit For 2013 Volkswagen Passat Bright Light
    Fit For 2014 Volkswagen Passat Bright Light
    Fit For 2015 Volkswagen Passat Bright Light

     

    WARRANTY & SUPPORT:

    • Free shipping
    • 45 days money-back guarantee & free return
    • 1-year hassle-free replacement warranty
    • 24/7 online email contact support
    • Monday - Friday telephone support
    *Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged.

     

    TECH SPEC:

    Bulb Size: H7
    Light Mode: Single Beam
    Usage: Bright Light
    LED Quantity: Package of 2 bulbs
    Chips: 70*90MIL High Efficiency LED Chips
    Dust Cover: Not Contain
    Voltage: DC 9-16V
    Light Power: 60W/set (30W/bulb)
    Luminous Flux: 6,000LM/set (3000LM/bulb)
    Color Temperature: Bright White 6,000K
    Lifespan: Over 50,000 hours
    Certification: IP67 Water and Dust Seal, CE, RoHS

     

    FEATURES:

    • Easy Installation: Quick & simple installation. Our custom H7 LED bulbs with a unique adapter are designed based on the factory bright light for Volkswagen Passat 2012-2015.

     Safer In Darkness:
    You won't be putting yourself at risk while driving at night with the custom H7 LED bulbs. 30W/bulb, 3000LM/bulb, 6000k cool white light. 400% Brighter Than Halogen. It's unique to compare with other dim sizes in light performance.

     White & Bright:
    Use 3pcs 70*90Mil big LED clips to improve the driving visibility. We design the bulbs to provide the same size and position as OEM halogen H7 bulbs. No matter in any harsh weather just enjoys the safe experience on your Volkswagen Passat 2012-2015.

     More Reliable & Stable:
    Heat Dissipation is crucial for lumen maintenance and lifespan of LEDs. This innovative H7 LED bulbs designed aluminum shell structure and high-quality mute fan bring out the heat and guarantee a longer lifespan.


    NOTICE:

    Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.

     

     

    Application:
    HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street-legality varies by country. For detailed clarification on-street use, CLICK HERE.
    Note: This usage regulation is not unique to Lasfit bulbs. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.

    DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)
    HOMOLOGATION ECE: NO

    Customer Reviews

    Based on 17 reviews
    59%
    (10)
    12%
    (2)
    6%
    (1)
    6%
    (1)
    18%
    (3)
    C
    Customer
    2013 Passat Tdi SEL

    I love the low beam Lasfit lights but the high beam are a different story. Even with the larger after market dust cap there isn't enough room for the wiring and OEM connector. It would hit the fan. Plus you have to cut a slit in the dust cap for the resistor. Poor design!!!!!!

    Hello,

    We're very sorry for the installation issue and the frustrating experience you had.
    A few of the Passat owners also met the same issue as yours, they solved it by sticking the dust cover with electrical tape and hanging the extended resistor.
    We will add this note to our product page, thank you for your feedback.

    Also, we have reached out to you through our customer support email cs@lasfit.com to follow up.
    Feel free to email back to us if you need any further support.

    Sincerely,
    Lasfit Customer Support Team

    E
    E.D.
    Volkswagen Passat TDI 2014

    I had purchased the low beam LED's about 2 years ago and they were perfect. At the time High beams were not available until the updated model was released recently near the end of 2022. It is currently April 2023 and I was able to install these and there are no codes on the dash.

    The first light I installed was a bit tough as it took a minute to figure out you need to push the clip while pushing the light to get it to start to lock in place.

    Then you need to push very carefully, so you don't break the fan blades, on the outer side of the fan frame to get it to finish clicking into place.

    Then you need cut / alter the 75mm that come with the lights so that the cords can pass through the edge 9f the dust cover. THIS IS MY ONLY GRIPE ABOUT THE PRODUCT. IT SHOULD BE ALTERED BEFORE SENT TO CUSTOMERS. It is also the reason for 4 stars.

    Then you need to cable/ zip tie the decoder to the chassis of the car. See the picture below for how I altered and attached the decoder to the chassis.

    Hello Eric,

    Thank you so much for sharing your product review.
    Yes, once the LED bulb is aligned with the housing's slot, it needs to keep pressing the leaf spring, then push on the bottom only, pretty hard.
    When the bulb will finally seat, you will hear the click of it locking in, if so, the installation will have no problem.
    Here we attach a video to show the installation details: https://www.youtube.com/watch?v=IdMj4RrimgA

    A few of the Passat owners also met the same issue as yours, they solved it by sticking the dust cover with electrical tape and hanging the extended decoder just like the picture you sent.
    We will add this note to our product page, thank you for your feedback.

    We also reached out to you through our customer support email cs@lasfit.com.
    If there is anything you'd like us to assist you with, we'll be glad to help you!

    Sincerely,
    Lasfit Customer Support Team

    M
    M.G.
    2015 Passat TDI

    I just finished installing my new low and high beam led lights.
    The installation of the low beam was plug and play. It took me about 15 mins to do the job.
    The high beam was plug and play also. I did have to work harder getting the clips to snap into place. As for the dust cover it did not go on without me modifying the cover. I just cut a small part at the bottom so the wires can fit in. As for the fan there again I just cut a hole big enough for the fan to work without hitting the cover. For the extra box I just screwed it to the side panel to hold it in place. I am very happy with these led lights.I never got a code error on my dash.
    I only down fall is that Lasfit does not ship to Canada.

    T
    T.R.
    2014 VW Passat

    Great improvement over the stock halogen lighting. The engineering of the fitment and function of these bulbs is far superior to anything else I have installed. My only complaint would be that the installation of the high beam buld into the housing was a bit difficult to get the bulb completely seated. It took far more force than I would anticipate necessary.

    M
    M.V.
    Not the same as the video.

    Mine came with a lot of cords with nowhere to put them in order to fit the dust cap on. Just paid $132 in total for some bullshit

    Hello Mark,

    We're very sorry for the inconvenience caused and the frustrating experience you had.

    The installation video is showing the old version of Pro-VW-01 bulb, which caused an error code issue, so we upgraded this product with an external resistor, to fix the error issue.
    We do appreciate that you can point out this issue, we will replace it with a new installation video.

    Since this bulb comes with a resistor, that may be too big to fit in the lamp housing, as we mentioned on the product page, it needs to trim the aftermarket dust cover a bit and let the cable out, then you can use zip ties to mount the resister to the vehicle frame.

    But if you don't like it, we will send you a pre-paid return label under 45 days return guarantee, so you can return them for a refund.
    Feel free to email back to customer support email cs@lasfit.com if you need any further support.

    Sincerely,
    Lasfit Customer Support Team

  • Customer Reviews

    Based on 17 reviews
    59%
    (10)
    12%
    (2)
    6%
    (1)
    6%
    (1)
    18%
    (3)
    C
    Customer
    2013 Passat Tdi SEL

    I love the low beam Lasfit lights but the high beam are a different story. Even with the larger after market dust cap there isn't enough room for the wiring and OEM connector. It would hit the fan. Plus you have to cut a slit in the dust cap for the resistor. Poor design!!!!!!

    Hello,

    We're very sorry for the installation issue and the frustrating experience you had.
    A few of the Passat owners also met the same issue as yours, they solved it by sticking the dust cover with electrical tape and hanging the extended resistor.
    We will add this note to our product page, thank you for your feedback.

    Also, we have reached out to you through our customer support email cs@lasfit.com to follow up.
    Feel free to email back to us if you need any further support.

    Sincerely,
    Lasfit Customer Support Team

    E
    E.D.
    Volkswagen Passat TDI 2014

    I had purchased the low beam LED's about 2 years ago and they were perfect. At the time High beams were not available until the updated model was released recently near the end of 2022. It is currently April 2023 and I was able to install these and there are no codes on the dash.

    The first light I installed was a bit tough as it took a minute to figure out you need to push the clip while pushing the light to get it to start to lock in place.

    Then you need to push very carefully, so you don't break the fan blades, on the outer side of the fan frame to get it to finish clicking into place.

    Then you need cut / alter the 75mm that come with the lights so that the cords can pass through the edge 9f the dust cover. THIS IS MY ONLY GRIPE ABOUT THE PRODUCT. IT SHOULD BE ALTERED BEFORE SENT TO CUSTOMERS. It is also the reason for 4 stars.

    Then you need to cable/ zip tie the decoder to the chassis of the car. See the picture below for how I altered and attached the decoder to the chassis.

    Hello Eric,

    Thank you so much for sharing your product review.
    Yes, once the LED bulb is aligned with the housing's slot, it needs to keep pressing the leaf spring, then push on the bottom only, pretty hard.
    When the bulb will finally seat, you will hear the click of it locking in, if so, the installation will have no problem.
    Here we attach a video to show the installation details: https://www.youtube.com/watch?v=IdMj4RrimgA

    A few of the Passat owners also met the same issue as yours, they solved it by sticking the dust cover with electrical tape and hanging the extended decoder just like the picture you sent.
    We will add this note to our product page, thank you for your feedback.

    We also reached out to you through our customer support email cs@lasfit.com.
    If there is anything you'd like us to assist you with, we'll be glad to help you!

    Sincerely,
    Lasfit Customer Support Team

    M
    M.G.
    2015 Passat TDI

    I just finished installing my new low and high beam led lights.
    The installation of the low beam was plug and play. It took me about 15 mins to do the job.
    The high beam was plug and play also. I did have to work harder getting the clips to snap into place. As for the dust cover it did not go on without me modifying the cover. I just cut a small part at the bottom so the wires can fit in. As for the fan there again I just cut a hole big enough for the fan to work without hitting the cover. For the extra box I just screwed it to the side panel to hold it in place. I am very happy with these led lights.I never got a code error on my dash.
    I only down fall is that Lasfit does not ship to Canada.

    T
    T.R.
    2014 VW Passat

    Great improvement over the stock halogen lighting. The engineering of the fitment and function of these bulbs is far superior to anything else I have installed. My only complaint would be that the installation of the high beam buld into the housing was a bit difficult to get the bulb completely seated. It took far more force than I would anticipate necessary.

    M
    M.V.
    Not the same as the video.

    Mine came with a lot of cords with nowhere to put them in order to fit the dust cap on. Just paid $132 in total for some bullshit

    Hello Mark,

    We're very sorry for the inconvenience caused and the frustrating experience you had.

    The installation video is showing the old version of Pro-VW-01 bulb, which caused an error code issue, so we upgraded this product with an external resistor, to fix the error issue.
    We do appreciate that you can point out this issue, we will replace it with a new installation video.

    Since this bulb comes with a resistor, that may be too big to fit in the lamp housing, as we mentioned on the product page, it needs to trim the aftermarket dust cover a bit and let the cable out, then you can use zip ties to mount the resister to the vehicle frame.

    But if you don't like it, we will send you a pre-paid return label under 45 days return guarantee, so you can return them for a refund.
    Feel free to email back to customer support email cs@lasfit.com if you need any further support.

    Sincerely,
    Lasfit Customer Support Team

  • Customer Reviews

    Based on 17 reviews
    59%
    (10)
    12%
    (2)
    6%
    (1)
    6%
    (1)
    18%
    (3)
    C
    Customer
    2013 Passat Tdi SEL

    I love the low beam Lasfit lights but the high beam are a different story. Even with the larger after market dust cap there isn't enough room for the wiring and OEM connector. It would hit the fan. Plus you have to cut a slit in the dust cap for the resistor. Poor design!!!!!!

    Hello,

    We're very sorry for the installation issue and the frustrating experience you had.
    A few of the Passat owners also met the same issue as yours, they solved it by sticking the dust cover with electrical tape and hanging the extended resistor.
    We will add this note to our product page, thank you for your feedback.

    Also, we have reached out to you through our customer support email cs@lasfit.com to follow up.
    Feel free to email back to us if you need any further support.

    Sincerely,
    Lasfit Customer Support Team

    E
    E.D.
    Volkswagen Passat TDI 2014

    I had purchased the low beam LED's about 2 years ago and they were perfect. At the time High beams were not available until the updated model was released recently near the end of 2022. It is currently April 2023 and I was able to install these and there are no codes on the dash.

    The first light I installed was a bit tough as it took a minute to figure out you need to push the clip while pushing the light to get it to start to lock in place.

    Then you need to push very carefully, so you don't break the fan blades, on the outer side of the fan frame to get it to finish clicking into place.

    Then you need cut / alter the 75mm that come with the lights so that the cords can pass through the edge 9f the dust cover. THIS IS MY ONLY GRIPE ABOUT THE PRODUCT. IT SHOULD BE ALTERED BEFORE SENT TO CUSTOMERS. It is also the reason for 4 stars.

    Then you need to cable/ zip tie the decoder to the chassis of the car. See the picture below for how I altered and attached the decoder to the chassis.

    Hello Eric,

    Thank you so much for sharing your product review.
    Yes, once the LED bulb is aligned with the housing's slot, it needs to keep pressing the leaf spring, then push on the bottom only, pretty hard.
    When the bulb will finally seat, you will hear the click of it locking in, if so, the installation will have no problem.
    Here we attach a video to show the installation details: https://www.youtube.com/watch?v=IdMj4RrimgA

    A few of the Passat owners also met the same issue as yours, they solved it by sticking the dust cover with electrical tape and hanging the extended decoder just like the picture you sent.
    We will add this note to our product page, thank you for your feedback.

    We also reached out to you through our customer support email cs@lasfit.com.
    If there is anything you'd like us to assist you with, we'll be glad to help you!

    Sincerely,
    Lasfit Customer Support Team

    M
    M.G.
    2015 Passat TDI

    I just finished installing my new low and high beam led lights.
    The installation of the low beam was plug and play. It took me about 15 mins to do the job.
    The high beam was plug and play also. I did have to work harder getting the clips to snap into place. As for the dust cover it did not go on without me modifying the cover. I just cut a small part at the bottom so the wires can fit in. As for the fan there again I just cut a hole big enough for the fan to work without hitting the cover. For the extra box I just screwed it to the side panel to hold it in place. I am very happy with these led lights.I never got a code error on my dash.
    I only down fall is that Lasfit does not ship to Canada.

    T
    T.R.
    2014 VW Passat

    Great improvement over the stock halogen lighting. The engineering of the fitment and function of these bulbs is far superior to anything else I have installed. My only complaint would be that the installation of the high beam buld into the housing was a bit difficult to get the bulb completely seated. It took far more force than I would anticipate necessary.

    M
    M.V.
    Not the same as the video.

    Mine came with a lot of cords with nowhere to put them in order to fit the dust cap on. Just paid $132 in total for some bullshit

    Hello Mark,

    We're very sorry for the inconvenience caused and the frustrating experience you had.

    The installation video is showing the old version of Pro-VW-01 bulb, which caused an error code issue, so we upgraded this product with an external resistor, to fix the error issue.
    We do appreciate that you can point out this issue, we will replace it with a new installation video.

    Since this bulb comes with a resistor, that may be too big to fit in the lamp housing, as we mentioned on the product page, it needs to trim the aftermarket dust cover a bit and let the cable out, then you can use zip ties to mount the resister to the vehicle frame.

    But if you don't like it, we will send you a pre-paid return label under 45 days return guarantee, so you can return them for a refund.
    Feel free to email back to customer support email cs@lasfit.com if you need any further support.

    Sincerely,
    Lasfit Customer Support Team