Are you looking for suitable LED headlight bulbs for your Hyundai Veloster? LASFIT got a lot feedback that H7 LED bulbs on the market do not fit the Hyundai Veloster, because the factory headlight bulbs come with a retainer holder, which requires a retainer adapter if installing after-market LED headlight kits.
LASFIT developed custom-made H7 LED headlight bulbs for Hyundai Veloster, direct plug and play, no need to install other retainer adapters. In this blog, we show you how to install these new LED headlight bulbs on 2016 Hyundai Veloster, and how they are working. We also replaced the stock map light and trunk light to LED bulbs, a huge difference.
Hyundai Veloster LED Replacement List
Low Beam Light: Pro-HK6
(Stock halogen bulb size: H7) 60w/set, 6000lm/set, 6000k crystal white. 400% brighter than halogen. Huge improvement than the stock bulb. Perfect Beam Pattern. No dark spot, and no issues with blinding oncoming traffic. Also, it fits perfectly even allows the dust cap to tighter like factory.
Super easy installation means Pro-HK6 allow you to have a simple and fast within 10-15 minutes. No error code and no flickering. No need any extra retainer adapter or parts.
When you get your hands on Pro-HK6, you will find it so much more convenient compared to a universal H7 bulb with an adapter combination. All you need to do is remove the old halogen bulb and plug in the new Lasfit Pro-HK6 LED bulb. We made it simple, the way it should have always been.
Map Light & Trunk Light: L-28MM
(Map light stock halogen bulb size: DE3175 & Trunk light stock halogen bulb size: 6418) 28mm LED festoon light bulbs. Using high power 3030 SMD LED chips, extremely 6000K white light. That's enough to light up your car. Build-in CANBUS decoder, don't cause "lamp out" errors in MOST applications. Fit perfectly in the same light housing as your original incandescent bulbs, for plug and play installation. The bulb body is slim, sleek, and incredibly compact to stay out of the way when plugged in.
Hyundai Veloster LED Replacement Process
Installation of low beam light
Picture1: Lasfit Pro-HK6
Picture2: Remove the dust cover.
Picture3: Remove the halogen bulb from the housing.
Picture4: Remove the halogen bulb from the socket.
Picture5: Use a tool to remove the power plug from the adapter retainer.
Pictue6: The Pro-HK6 adapter is the same size as the original adapter and can perfectly fit the housing.
Picture7: Distinguish the positive and negative poles of the plug.
Picture8: Insert the LED light into the assembly without the need for an additional adapter, it can be perfectly inserted.
Picture9: Connect the plug of the LED bulb to the power socket of the assembly.
Picture10: Wrap the exposed wires with insulating tape.
Picture11: Put on the dust cover in the place.
Picture12: Real shot comparison of halogen and LED lights.
Installation of map light bulbs
Picture1: Lasfit L-28MM
Picture2: Remove the map light cover.
Picture3: Remove the halogen bulb.
Picture4: Insert the LED bulb into the map light socket.
Picture5: Illumination effect of the map light after replacing it with Lasfit L-28MM.
Installation of trunk light
Picture1: Lasfit L-28MM
Picture2: Remove the trunk light cover with tools.
Picture3: Detach the power cord and remove the socket.
Picture4: Insert the LED bulb into the socket.
Picture5: Assemble the trunk light socket completely.
Picture6: Plug in the power.
Picture7: Display of LED lighting effect.
If you have used Lasfit products, we would love to hear about your experience. Your honest reviews and testimonials help us improve and strive to provide the best products and services for all car enthusiasts. Thank you for choosing Lasfit!
