How to Install Anti Kick Pads on Tesla Model 3 & Y
by Lasfit OfficialMay 30, 2023
The anti-kick pads are manufactured 1:1 according to the original Tesla Model 3 & Y. Protect the sides of the center console from dust, footprints, slush, mud, scratches and scuffs to keep your center console clean. Matched to the interior, this Tesla interior will make your Model 3 & Y look even more upscale. The combination of additional Center Console Side Anti Kick Pads + Dead Pedal Side Anti Kick Pads can provide more comprehensive protection for your Model 3 & Y.
1.Table Of Contents
Accessories Installation Instructions Effect Picture After Installation Attention FAQ Where Can I Buy Anti Kick Pads?
2. Accessories
PACKAGE CONTAINS Lasfit Inside Corner Anti Kick Pads Includes: ● First Row Left Inside Corner Anti-kick Pad*1 ● First Row Right Inside Corner Anti-kick Pad*1 ● User Manual*1
Lasfit Center Console Side Anti Kick Pads Includes: ● First Row Left Center Console Side Anti-kick Pad*1 ● First Row Right Center Console Side Anti-kick Pad*1 ● User Manual*1
3. Installation Guide
Lasfit Inside Corner Anti Kick Pads 1. Ensure that the product corresponds to the correct position. 2. Tear off the release paper on the back of the double-sided adhesive tape at one end, and paste it in a good position. 3. Tear off the release paper on the back of the double-sided adhesive tape on the remaining sides in turn, and paste it firmly. 4. Turn out the soft rubber on the side of the door and wrap the product.
Lasfit Center Console Side Anti Kick Pads 1. Ensure the correct position of the product. 2. Align the edge of the product with the edge of the car body structure and fix the position. 3. Then align the remaining part with the body structure, and press it firmly.
4. Effect Picture After Installation
5. Attention
1. When you receive the package, please check whether it is complete If there is any missing, please contact the after-sales service. 2. In order to ensure the service life of the product, please do not disassemble it after installation. If you need to clean it, please wipe it with a damp cloth. 3. Ambient temperature for product use: －30℃ - 80℃, in order to ensure your experience, please do not stay in extreme temperature for a long time. 4. Please don't use ethanol with a concentration of more than 30% for cleaning or disinfection. 5. When you find that the product is deformed and cannot be recovered, please remove it in time.
6. FAQ
Q1: What type of material is used? A1: The First Row Inside Corner Anti-kick Pads are made of premium quality TPE materials, ensuiring BPA Free, Non-Toxic and environment friendly. TPE has a good performance in elasticity, impact resistance, shock absorption and scratch resistance.
Q2: Are they easy to clean? A2: Yes, the First Row Inside Corner Anti-kick Pads are dirt-resistant and waterproof. When cleaning, just wipe it with a wet cloth and it can be like new.
Q3: What should I do if product doesn't stick well after long time use? A3: You can replace the double adhesive to a much stronger one.
Q4: Will it hurt the original car interior? A4: The First Row Inside Corner Anti-kick Pads are made of premium quality TPE materials, which is soft and will not hurt the original door sill, and it will not leave marks on the car when disassembled.
7. Where Can I Buy Lasfit Anti Kick Pads?
If you are going to use Lasfit Anti Kick Pads to upgrade your vehicle, please click the link below or log in to our LASFIT official webpage to choose.
Basically we're protected on the carpet. We have the door sill protector. We also have this kick pad protected now. And pretty much everywhere that you put your feet on is going to be protected by Lasfit. Everything fits perfectly and now the car actually looks newer again. So there are no scratches on our trim anymore. If you had your Tesla for a long time already, and this part is already scratched, you could probably get this door sill protector so that it looks new again. Or if you just got a new car, you could use this to protect it from getting scratched. It's good for both worlds.
One of the main purposes to have these mats is to protect the rear seats of your car. And you know it doesn't matter if you're picking them up soil, or you're picking up plants. You want to make sure that the back of your car is covered. If something does spill onto these rear covers, they're easy to clean. All you have to do is take it out, wipe it or hose it down, and put it back in. They look great. Installation was easy. And it works 100%.
This trunk mat is pretty cool. I actually like how it looks and actually matches the floor mats. As you can see right here. And now we have full coverage with Lasfit floor liners. The floor mat is doing its job, just fine. It fits really well and looks good overall. Just a great set of floor mats.
