H4 9003 HB2 LED Bulb Load Resistor Harness Anti-Hyper Flash Error Free

SKU#:RDH4-NEW

Pre-Christmas 10% OFF Sitewide. Use Code: PREXMAS


  • Please leave the vehicle year/make/model information on the shopping cart before ordering this decoder.
    LASFIT will check and make sure it's correct one before shipping.

    Product Description

    • Lasfit LED headlight load resistors are designed to allow aftermarket LED Headlight bulbs to work flawlessly with TIPM equipped vehicles.
    • TIPM (Totally Integrated Power Module) reads a power imbalance with LED bulbs which cause hyper flashing, abnormal blinking, computer warning, bulb rejection, etc.
    • These load resistors eliminate error messages on the dashboard, and prevent hyper flashing by simulating stock halogen load without causing damage to the TIPM.
    • Plug and play design for H4/ 9003/ HB2 LED Headlight kits, and easy to install. All that’s required is to connect the wires with the splice taps provided.

     

    Features
    Compatible Bulb Size: H4 (9003 HB2) 
    Usage: Headlight High & Low 
    Voltage: 12V
    Power: 50W
    Resistance: 6 Ohm
    Warranty: 6 Months
    Wire Length: 21.7"
    Package includes: 2 x H4 Load Resistor Wiring Harness

     

    Installation Guide (Very Important)
    Step 1. These resistor decoders will get extremely hot while working. Please put on heat resistant gloves and handle the plastic surface when installing to keep you safe from the heat.
    Step 2. Place them where they can get air & on heat-resistant/ non-combustible metal for a longer lifespan. Be cautious to keep them away from headlight housing or other plastic materials.


    Note
    1. May not solve all compatible issues as the tolerances of each vehicle system differs.
    2. We have two kinds of decoders: Load Resistor and Canbus decoder. If you are not sure which one to buy, please feel free to contact us for support.

    Customer Reviews

    Based on 1 review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    100%
    (1)
    R
    Richard Butler
    Challenged

    When I bought the LED bulbs no one mentioned I needed the resistors to make this work. I bought them and when I installed them they got so hot I was worried about creating a fire hazzard. Why cant a resistor be included in the bulb where a fan is already present to keep them cool and safe. I ended up going back to a regular halogen bulb.

    Hello Richard,

    Thank you for taking the time to write us a review!

    We checked our support system and found that we received no communication from you. Actually, we only can tell if it needs resistor or not only when you leave us your vehicle Year/Make/Model information on the shopping cart or message just because not all the vehicle should need a resistor when upgrading to the LED.

    For most the vehicles, it will work well without loading a resistor. But for some vehicle like Jeep and Camry, it will be getting flicker when upgrading to aftermarket LED bulb.

    My promise to you is I will provide you with an expedient resolution and more superior perspective on LASFIT. For this issue, we had contacted you by our customer support email cs@lasfit.com to help you in the solution.
    Looking forward to your reply.

    Sincerely,
    Lasfit Customer Support Team

  • Customer Reviews

    Based on 1 review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    100%
    (1)
    R
    Richard Butler
    Challenged

    When I bought the LED bulbs no one mentioned I needed the resistors to make this work. I bought them and when I installed them they got so hot I was worried about creating a fire hazzard. Why cant a resistor be included in the bulb where a fan is already present to keep them cool and safe. I ended up going back to a regular halogen bulb.

    Hello Richard,

    Thank you for taking the time to write us a review!

    We checked our support system and found that we received no communication from you. Actually, we only can tell if it needs resistor or not only when you leave us your vehicle Year/Make/Model information on the shopping cart or message just because not all the vehicle should need a resistor when upgrading to the LED.

    For most the vehicles, it will work well without loading a resistor. But for some vehicle like Jeep and Camry, it will be getting flicker when upgrading to aftermarket LED bulb.

    My promise to you is I will provide you with an expedient resolution and more superior perspective on LASFIT. For this issue, we had contacted you by our customer support email cs@lasfit.com to help you in the solution.
    Looking forward to your reply.

    Sincerely,
    Lasfit Customer Support Team

  • Shipping Policy

    Please confirm shipping address and billing address.The shipping address should be a physical address, we DO NOT ship to P.O. box address.


    Handling Time
    Once the order was placed please allow us 1-2 business days for packing and shipping, checking the order information is a very important step to build a better shopping experience.
    Special Case: For the transaction paid by using a PayPal eCheck, the payment will be completed within 3-6 business days. The handing and shipping should be started up as soon as the payment to be successful.

    Shipping Time
    The order will be shipped on the same day or next business day, especially for the order on Friday or weekend, it would be shipped on the next business day.
    Lasfit website orders were being supported by USPS, UPS, FedEx. 

    International Shipping/ Postage
    We could not offer International shipping service at this moment.


    Warranty Policy

    If you get any warranty-related trouble with Lasfit brand, you could contact Lasfit directly for professional and quick support, we'll help you solve the issue for 100% sure! We also take care of all quality-related issues with a replacement or full refund including any return shipping costs. 
    The products purchased from one of our retailers, we do not provide support related to after-sales. Please contact the retailer directly for specific guidance on their warranty process. 
    Unauthorized reselling of Lasfit products is strictly prohibited and we can't honor the warranty if purchasing from the unauthorized reseller.

     

    Exchange & Return Policy

    When you purchase products from Lasfit official site, you agree to our policy about returns, exchanges, and refunds as outlined. More details please check out exchange & return policy.
  • Customer Reviews

    Based on 1 review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    100%
    (1)
    R
    Richard Butler
    Challenged

    When I bought the LED bulbs no one mentioned I needed the resistors to make this work. I bought them and when I installed them they got so hot I was worried about creating a fire hazzard. Why cant a resistor be included in the bulb where a fan is already present to keep them cool and safe. I ended up going back to a regular halogen bulb.

    Hello Richard,

    Thank you for taking the time to write us a review!

    We checked our support system and found that we received no communication from you. Actually, we only can tell if it needs resistor or not only when you leave us your vehicle Year/Make/Model information on the shopping cart or message just because not all the vehicle should need a resistor when upgrading to the LED.

    For most the vehicles, it will work well without loading a resistor. But for some vehicle like Jeep and Camry, it will be getting flicker when upgrading to aftermarket LED bulb.

    My promise to you is I will provide you with an expedient resolution and more superior perspective on LASFIT. For this issue, we had contacted you by our customer support email cs@lasfit.com to help you in the solution.
    Looking forward to your reply.

    Sincerely,
    Lasfit Customer Support Team