Lasfit H13 CANBUS resistor decoder

H13 9008 LED Bulb Load Resistor Harness Anti-Flicker Warning Canceler Decoder

Lasfit 9008 error warning hyper flash flicker canceller details

H13 9008 LED Bulb Load Resistor Harness Anti-Flicker Warning Canceler Decoder

H13 9008 LED Bulb Load Resistor Harness Anti-Flicker Warning Canceler Decoder

Lasfit H13 load resistor wiring harness installation

Lasfit 9008 error code canceler caution do not touch

H13 9008 LED Bulb Load Resistor Harness Anti-Flicker Warning Canceler Decoder

H13 9008 LED Bulb Load Resistor Harness Anti-Flicker Warning Canceler Decoder

$19.99

SKU#:RDH13-NEW

SPEND $250 GET $40 OFF

Code: WIN40 COPY

SPEND $350 GET $60 OFF

Code: WIN60 COPY

Note: at most one code per order at checkout.

Details
Reviews
Q&A
Policy
Contact Us

Please leave the vehicle year/make/model information on the shopping cart before you make a purchase on this decoder. Lasfit will check and make sure it's the correct one before shipping.

Product Description
- Lasfit LED bulb load resistors are designed to allow aftermarket LED bulbs to work flawlessly with TIPM equipped vehicles.
- TIPM (Totally Integrated Power Module) reads a power imbalance with LED bulbs causing hyper flashing, abnormal blinking, computer warning, bulb rejection, etc.
- These load resistors eliminate error messages on the dashboard and prevent hyper flashing by simulating stock halogen load without causing damage to the TIPM.
- Plug and play design for H13/ 9008 LED kits and easy to install. All that’s required is to connect the wires with the splice taps provided.
Features
Compatible Bulb Size: H13 (9008)
Usage: LED Forward Lighting
Voltage: 13.2V
Power: 15W
Warranty: 6 Months
Wire Length: 8.27"
Package includes: 2 x H13 Load Resistor Wiring Harness

Application
Ram 1500: 2006-2014
Ram 2500: 2006-2012
Ram 3500: 2006-2009, 2012
Dodge Caliber: 2007-2012
*Please purchase one set to solve the issue concerning compatibility.

Note
1. May not solve all compatible issues as the tolerances of each vehicle system differs.
2. We have two kinds of decoders: Load Resistor and Canbus decoder. If you are not sure which one to buy, please feel free to contact us for support.

Waring:
During operation, resistors will get hot. This is a nature of resistor. It is hot enough to melt any plastic part they touch, including other wires. They need to be tap screwed or metal zip tied for sure.

Sometimes it is hard to find a proper place for resistors. Please check your car before purchase.

If you are not professional on installing and not confident to use this product, please do not purchase before doing research. Modification is troublesome. It is not bad to stay with factory halogen bulbs.

Customer Reviews

Based on 2 reviews
Write a review

100%

(2)

0%

(0)

0%

(0)

0%

(0)

0%

(0)

J

J.C.

2009 Dodge Caliber
Ordered the H13 bulbs from the site as I've ordered a few products with amazing results and the stock bulbs on my car being less than adequate for nighttime driving. When it appeared the bulbs were burning out and flickering after only 1-2 hours of use, I contacted customer service where they were able to determine this should fix the problem within 24 hours and arranged to have a set of these sent right out to me! I received them later last night and they were plug and play with no modifications needed on my vehicle (I used 2-sided hi temperature tape to mount mine), beautifully packaged with only minor flickers for about 3-5 seconds before my LED bulbs held steady operated as intended. Assuming it was the system within my car figuring everything out and no trouble here initially. Due to this being a colder-weather environment (-20 - -30 degrees F on average until around Mar) and this being the first "daily driver" (all other vehicles have been garaged through winter) I've installed these on, I'm very curious to see how they hold up through one of our winters and intend to write a more detailed review next spring with results. I'd have posted a video as well but had to hurry on this install as we're due for snow already today!

A HUGE Thanks to customer service on this one as the company does back their products and want to ensure everyone's needs are met. My headlights work better than stock and Lasfit did everything possible to ensure I was happy with what I put into my vehicle. A personal thanks to the rep (Cindy) at Lasfit customer service for working with me to remedy this and getting me back on the road with brighter bulbs!

D

D.C.

These work!!!
I have a 09 explorer sport trac 4.0 litre. I have sylvania h13 led lights. These resistors solved my flickering/wackiness issue with me lights. not the canbus ones but these. Thanks!
Customer Reviews

Based on 2 reviews
Write a review

100%

(2)

0%

(0)

0%

(0)

0%

(0)

0%

(0)

J

J.C.

2009 Dodge Caliber
Ordered the H13 bulbs from the site as I've ordered a few products with amazing results and the stock bulbs on my car being less than adequate for nighttime driving. When it appeared the bulbs were burning out and flickering after only 1-2 hours of use, I contacted customer service where they were able to determine this should fix the problem within 24 hours and arranged to have a set of these sent right out to me! I received them later last night and they were plug and play with no modifications needed on my vehicle (I used 2-sided hi temperature tape to mount mine), beautifully packaged with only minor flickers for about 3-5 seconds before my LED bulbs held steady operated as intended. Assuming it was the system within my car figuring everything out and no trouble here initially. Due to this being a colder-weather environment (-20 - -30 degrees F on average until around Mar) and this being the first "daily driver" (all other vehicles have been garaged through winter) I've installed these on, I'm very curious to see how they hold up through one of our winters and intend to write a more detailed review next spring with results. I'd have posted a video as well but had to hurry on this install as we're due for snow already today!

A HUGE Thanks to customer service on this one as the company does back their products and want to ensure everyone's needs are met. My headlights work better than stock and Lasfit did everything possible to ensure I was happy with what I put into my vehicle. A personal thanks to the rep (Cindy) at Lasfit customer service for working with me to remedy this and getting me back on the road with brighter bulbs!

D

D.C.

These work!!!
I have a 09 explorer sport trac 4.0 litre. I have sylvania h13 led lights. These resistors solved my flickering/wackiness issue with me lights. not the canbus ones but these. Thanks!
Customer Reviews

Based on 2 reviews
Write a review

100%

(2)

0%

(0)

0%

(0)

0%

(0)

0%

(0)

J

J.C.

2009 Dodge Caliber
Ordered the H13 bulbs from the site as I've ordered a few products with amazing results and the stock bulbs on my car being less than adequate for nighttime driving. When it appeared the bulbs were burning out and flickering after only 1-2 hours of use, I contacted customer service where they were able to determine this should fix the problem within 24 hours and arranged to have a set of these sent right out to me! I received them later last night and they were plug and play with no modifications needed on my vehicle (I used 2-sided hi temperature tape to mount mine), beautifully packaged with only minor flickers for about 3-5 seconds before my LED bulbs held steady operated as intended. Assuming it was the system within my car figuring everything out and no trouble here initially. Due to this being a colder-weather environment (-20 - -30 degrees F on average until around Mar) and this being the first "daily driver" (all other vehicles have been garaged through winter) I've installed these on, I'm very curious to see how they hold up through one of our winters and intend to write a more detailed review next spring with results. I'd have posted a video as well but had to hurry on this install as we're due for snow already today!

A HUGE Thanks to customer service on this one as the company does back their products and want to ensure everyone's needs are met. My headlights work better than stock and Lasfit did everything possible to ensure I was happy with what I put into my vehicle. A personal thanks to the rep (Cindy) at Lasfit customer service for working with me to remedy this and getting me back on the road with brighter bulbs!

D

D.C.

These work!!!
I have a 09 explorer sport trac 4.0 litre. I have sylvania h13 led lights. These resistors solved my flickering/wackiness issue with me lights. not the canbus ones but these. Thanks!