The Custom-Fit H11 LED Bulbs w/Dust Cover 
for 2022 Chevrolet Silverado 1500

These LED bulbs (Pro-CS-01L) were specially designed for 2022 Chevrolet/Chevy Silverado 1500 with stock H11 halogen bulbs. The custom-fit dust covers are built-in turbo cooling fan to work with LED bulbs for quick heat-dissipation and protect the LED bulbs from water and dust. Besides, Lasfit released more high-performance LED bulbs to fit for Chevrolet Silverado 1500, front turn signal lights, backup lights, cargo light, license plate lights and front side marker lights.

Why Lasfit developed Custom-Fit H11 LED Bulbs w/Dust Cover?

1. Highly Efficient Heat-Dissipation, Last Longer
A lot of customers worry about the LED bulbs will overheat in a sealed forward light housing after working for a long time if installing regular H11 LED bulbs. This custom LED bulbs(Pro-CS-01L) were specially designed for 2022 Chevrolet Silverado 1500. It features easy plug and play installation so upgrading your truck takes minutes.  It’s a direct plug n play kit. Besides, another excellent feature is the in-built turbofan on the dust cover. When the LED bulb is working, the turbofan rotates to dissipate heat outside. When the LED bulb stops working, the vent will close automatically and prevents water/dust goes into the housing. Currently, the only one of its kind on the market.

2. High Brightness, Focused Output Lighting, Clear Visibility
The LED forward light bulbs used massive & powerful high-level 80*80MIL LED chips, its small footprint allows for maximum lumen density. And the ultra-high luminous efficiency up to 50W, 5000LM per bulb, impressive brighter compared to stock halogens and make it much easier to see in the nighttime when properly align the bulb height/orientation. Definitely smart choice！

Bright Light
• H11 LED bulbs
• LA plus series
• 60W/set
• 6000LM/set
• 6000K white
• 360 degrees adjustable socket for adjusting the beam pattern
• Shorter size, plug and play Installation

Front Turn Signal Light
• 7440 LED bulbs
• T series
• 24W/bulb
• 2300LM/bulb
• Amber mode
• CANBUS support for error-free plug and play installation
• Built-in intelligent temperature control system (ITCS).


Reverse Light
• 921/ 912/ T15 LED bulb
• Bright white 6000K
• 3000LM/set
• 360º  illumination
• Non-polarity design allows for plug-and-play and error-free installation
• Direct replacement for OEM reverse light


License Plate Light
• 168/ 2825/ T10 LED bulb
• Bright white 6000K
• 800LM/set
• 3 high-power 3030 SMD LED chips, top and one on each side
• 360º illumination
• Non-polarity design

All-Weather Floor Mats
• TPE Rubber, Odorless, Strong and Durable
• 3D Measured Scanning
• Non-Slip, Safety
• All-Weather Protection
• Easy to Clean & Quick Drying

Combo Package Included

2 custom regular lights
2 bright lights
2 front turn signal lights
2 reverse lights
2 license plate lights

Notice

Our LED replaces halogen bulbs only.  It does not replace HID or LED from factory.

Application:
HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE.
Note: This usage regulation is not unique to Lasfit bulbs. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.

DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)
HOMOLOGATION ECE: NO

Customer Reviews

Based on 11 reviews

Write a review

82%

(9)

0%

(0)

0%

(0)

9%

(1)

9%

(1)

J

J.D.

2023 1500 Silverado Custom Trail Boss

Reverse lights go in easy and work great, that's about it. The low beam bulbs don't fit into the housing unless you swap out their gasket for the OEM.. What's the point then? I got the driver side in but on the passenger side no matter how you slide the bulb through, you cannot get the LED to line straight up and down. Furthermore, the high beam bulbs just don't fit, even swapping the gasket I could not get the bulb in far enough to rotate it secure. Also, design the housing/dust cover to be larger. It's nearly impossible to get both connectors to fit inside and still press it closed. I will be removing the headlights and putting back the stock. Waste of money.

Hello John,

We're very sorry for the installation issue and the frustrating experience you had.
Please don't worry, we offer 45 days free return, if the lights don't fit properly, we will email the return label.

Since our Pro-CS-01L bulbs can replace the halogen bulb names H8, H9, and H11, the rubber O-ring of the LED bulb may be a little thicker than the one of a factory halogen bulb, which could cause the LED won't lock into place.
For this issue, we suggest you remove the rubber O-ring from the halogen bulb and replace the one on our LED bulb.

After that, please align the 3 locking tabs to slots on the headlight housing, then twist them into place.
Here we attach pictures for your reference.
By the way, these bulbs are different on the Driver side and Passenger side, you can tell the difference by checking the bulb's base.
The driver side is marked as 'DRV', and the passenger side is marked as 'PASS', it would be great if you could make sure each bulb is installed in the correct location.

We also reached out to you through our customer support email cs@lasfit.com to follow up.
Look forward to hearing from you, thanks.

Sincerely,
Lasfit Customer Support Team

J

Joshua Wheeler

22 chevy 1500 custom trailboss

Oem headlights suck with a tinted windshield these headlights are light years better than oem and ya on coming traffic will b upset

B

B.S.

Chevrolet Silverado

Great lights and even better service

C

Corbin Renner

2023 Chevy custom

Lights are bright, install is not very easy. The fan on back of light is very hard to get inside headlight housing. Lights do not seem to be straight up and down after adjusting.

Hello Corbin,

We do appreciate that you could contact us for your trouble after installation.
For the light pattern issue, the rubber O-ring on LED bulb could be too thick to twist the bulb to a right angle in housing.
It will be great if you can remove the O-ring from your factory halogen bulb and replace the one on ours.

Additionally, please kindly note that these bulbs are different on the Driver side and Passenger side, you can tell the difference by checking the bulb's base.
The driver side is marked as 'DRV', and the passenger side is marked as 'PASS', please make sure each bulb is installed in the correct location.
After that, please align the 3 locking tabs to slots on the headlight housing, then you can twist the bulb into place and make it straight up and down.

We also reached out to you through our customer support email cs@lasfit.com to follow up.
If there is anything you'd like us to assist you with, we'll be glad to help you!

Sincerely,
Lasfit Customer Support Team

M

Mark Treadwell

22” Silverado Custom 1500

From Zero to Hero hands down. Money well spent!

123