0

Your Cart is Empty

Fit for 2009-2014 Nissan 370Z D2S HID to LEDs Exterior Interior Lights

SKU#:Pro-IN-D2+T-7443D+T-7440A+L-T15+L-T10*3

You Save 16% ($77.00)

Important Notice:

• The LED kits only replace the factory D2S D2R HID, the other exterior and interior bulbs only replace the factory halogen.

• Please leave your vehicle make/model/year to cart before place the order, so we can provide follow-up support to you better in the future.

Installation Location

  • Why Lasfit Pro-IN-D2 is the Best HID to LED conversion solution?

    The custom-made LED kits for Nissan 370Z 2009-2014 with HID forward light, which includes LED bulb and external LED ballast driver. The LED bulb replaces the OEM HID bulb, and the external ballast driver replaces the HID ballast. All plug and play. No cut, no modification, no splice. Please the video below for the installation process.

    You can purchase new OEM HID bulbs or HID ballast on the market, but they’ll be outrageously expensive. If you have the unfortunate experience of an HID ballast going out, or an HID bulb dying, then you’re looking at over $500 plus labor charges for an OEM replacement part. The aftermarket is filled with low quality HID kits that are marketed as high quality, and, supposedly, equal to OEM HID systems. Most are extremely low quality, and the type of products you don’t want to waste your money and time on.  You can replace them with aftermarket universal LED bulbs, but it requires you to cut and splice wires. It isn’t an impossible task, but it’ll be challenging. The potential for mistakes is high if you don’t know what you’re doing. The performance won’t be what you expected


    2009-2014 Nissan 370Z Bulb Size Replacement Guide: 

    dipped beam for 4runner Custom D2S bulb with ballast: Pro series|50W/bulb, 5500LM/bulb, 6000K bright white.
    HID bulbs take a few seconds to warm-up to achieve maximum brightness, but D2 LED bulbs can light up immediately. The D2 LED bulbs are 360 degrees adjustable socket to make sure you will get the best beam pattern by rotating the bulbs.

    Front Turn Signal Light 7443: T series|Switchback, amber and white color, 24W/bulb, 2300LM/bulb.
    Rear Turn Signal Light 7440NA: T series|Red color, 15W/bulb, 700LM/bulb super bright.
    T series turn signal light is built-in Canbus resistor system, anti hyper flash, error-free, no error message. Plug and play, no need resistor, no flickering. Totally refresh the tired and dim looking stock lights. Intelligent Temperature Control System protects led bulb against excessive current and overheating and ensures a longer lifespan.

    Back up Light 921/ 912: L series|1400LM/set, 6000K bright white light, plug and play. 
    The upgraded new version, built-in CANBUS system prevents error code and odd flickering. Non-polarity design allows for a plug and play (can be installed in any direction) and error-free installation. Direct replacement for OEM reverse light.

    License Plate/Map/Trunk Light 168/ 2825: 800LM/set, 6000K xenon white. 
    No flickering. Using high power 3030 SMD LED chips on each bulb. No need for any modification, just for plug n play installation.


    Tech Specs:

    Lifespan: Over 30,000 hours
    Certification: IP67 Water and Dust Seal, CE, RoHS
    Operating Temperature: -40-80 Degree Celsius
    Safe installation and use
    No need exterior driver or resistor parts


    Most Honest Policy:

    1 year hassle-free warranty
    45 days of fast return/money-back guarantee.
    Lifetime professional customer service
    Offline quick telephone support
    Physical store experience.
    *Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged.

     

     

    Application:
    HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE.
    Note: This usage regulation is not unique to Lasfit bulbs. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.

    DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA)
    HOMOLOGATION ECE: NO

     

    Customer Reviews

    Based on 1 review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    100%
    (1)
    A
    A

    This is not plug and play. Front bumper needs to be removed in order to remove the ballast which you need to modify as the original light connector cannot power these bulbs (how 'plug and play should be)

    Be warned it's not a simple take the wheel off and remove the old bulb and plug in the led....nope it's not that easy and this is almost false advertising.

    Hello Alex,

    Thank you for bringing this to our attention.
    We do apologize for the inconvenience caused to you and would like to clarify the situation as follows:
    1. As we mentioned on the product page, these Pro-IN-D2 LED bulbs come with an after-market HID ballast, so you will need to remove the factory ballast first before installing the new one, the LED bulbs and after-market HID ballast is in one set, the factory ballast can't work with the new LED bulb.

    2. The feature of plug-and-play in advertising means zero need to bypass the ballast or cut/splice wires to power the LED headlight bulbs, you will only need to remove the factory HID bulb and ballast then install the new Pro-IN-D2 LED bulbs, and after-market HID ballast.
    Please don't worry, we offer 45 days free return, if you don't like them, we will send you a pre-paid return label to return these bulbs.
    We are wondering if you have installed these bulbs successfully.
    Here we enclose the installation video for your reference:https://www.youtube.com/watch?v=NmH99O0W9L4

    We also reached out to you through our customer support email cs@lasfit.com to follow up.
    Look forward to hearing from you, thanks.

    Sincerely,
    Lasfit Customer Support Team

  • Customer Reviews

    Based on 1 review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    100%
    (1)
    A
    A

    This is not plug and play. Front bumper needs to be removed in order to remove the ballast which you need to modify as the original light connector cannot power these bulbs (how 'plug and play should be)

    Be warned it's not a simple take the wheel off and remove the old bulb and plug in the led....nope it's not that easy and this is almost false advertising.

    Hello Alex,

    Thank you for bringing this to our attention.
    We do apologize for the inconvenience caused to you and would like to clarify the situation as follows:
    1. As we mentioned on the product page, these Pro-IN-D2 LED bulbs come with an after-market HID ballast, so you will need to remove the factory ballast first before installing the new one, the LED bulbs and after-market HID ballast is in one set, the factory ballast can't work with the new LED bulb.

    2. The feature of plug-and-play in advertising means zero need to bypass the ballast or cut/splice wires to power the LED headlight bulbs, you will only need to remove the factory HID bulb and ballast then install the new Pro-IN-D2 LED bulbs, and after-market HID ballast.
    Please don't worry, we offer 45 days free return, if you don't like them, we will send you a pre-paid return label to return these bulbs.
    We are wondering if you have installed these bulbs successfully.
    Here we enclose the installation video for your reference:https://www.youtube.com/watch?v=NmH99O0W9L4

    We also reached out to you through our customer support email cs@lasfit.com to follow up.
    Look forward to hearing from you, thanks.

    Sincerely,
    Lasfit Customer Support Team

  • Customer Reviews

    Based on 1 review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    100%
    (1)
    A
    A

    This is not plug and play. Front bumper needs to be removed in order to remove the ballast which you need to modify as the original light connector cannot power these bulbs (how 'plug and play should be)

    Be warned it's not a simple take the wheel off and remove the old bulb and plug in the led....nope it's not that easy and this is almost false advertising.

    Hello Alex,

    Thank you for bringing this to our attention.
    We do apologize for the inconvenience caused to you and would like to clarify the situation as follows:
    1. As we mentioned on the product page, these Pro-IN-D2 LED bulbs come with an after-market HID ballast, so you will need to remove the factory ballast first before installing the new one, the LED bulbs and after-market HID ballast is in one set, the factory ballast can't work with the new LED bulb.

    2. The feature of plug-and-play in advertising means zero need to bypass the ballast or cut/splice wires to power the LED headlight bulbs, you will only need to remove the factory HID bulb and ballast then install the new Pro-IN-D2 LED bulbs, and after-market HID ballast.
    Please don't worry, we offer 45 days free return, if you don't like them, we will send you a pre-paid return label to return these bulbs.
    We are wondering if you have installed these bulbs successfully.
    Here we enclose the installation video for your reference:https://www.youtube.com/watch?v=NmH99O0W9L4

    We also reached out to you through our customer support email cs@lasfit.com to follow up.
    Look forward to hearing from you, thanks.

    Sincerely,
    Lasfit Customer Support Team