How to Upgrade Your Jeep Gladiator with Lasfit LED Bulbs: A Step-by-Step Guide
|
|
Special thanks to Ridge Roamer Motorsports for the detailed installation demonstrations that inspired this guide.
If your Jeep Gladiator didn’t come with the factory LED lighting package, you might be dealing with subpar halogen lights that compromise both safety and visibility. Halogen headlights are often dim, with a yellowish hue that doesn’t provide adequate illumination for nighttime driving. This is where an upgrade to high-performance LED headlights can make a world of difference.
Key Benefits of LED Upgrade:
Upgrading to LED headlights doesn’t just improve visibility—it enhances safety and ensures your vehicle looks sharp while on the road.
The Lasfit LS Plus LED headlight kit is specifically engineered for effortless installation, offering everything you need to upgrade your vehicle’s lighting system with ease.
This kit includes:
What makes the Lasfit LS Plus LED kit stand out is its true plug-and-play design. No wiring modifications or special tools are required, making it easy to upgrade your headlights to the brightest LED bulbs on the market and get them working in no time.
1.Access the Headlight Assembly
a. Open the engine bay and locate the headlight dust cover at the rear of the assembly.
b. Twist the dust cover counterclockwise to remove it.
2.Remove the Factory Bulbs
a. Unplug the wiring harness connector attached to the halogen bulb.
b. Press the retention clip to release the bulb.
c. Carefully remove the halogen bulb from its housing.
3.Install Lasfit LED Bulbs
a. Connect the new LED bulb to the factory harness.
b. Secure the bulb in the housing by inserting it properly.
c. Position the driver and wiring inside the headlight assembly and ensure proper cable management.
4.Finalize Installation
a. Reinstall the dust cover to ensure the assembly is waterproof.
b. Double-check that everything is secured properly.
c. Test the headlight operation to make sure the LED bulbs are working correctly.
Pro Tip: For the driver’s side installation, temporarily removing the air intake box will provide significantly better access, making the process easier.
After putting the Lasfit LS Plus LED headlights through extensive testing, the results were nothing short of impressive. Here’s how the LS Plus compared to the stock halogen lights:
Low Beam Performance: The low beams from the Lasfit LS Plus LED bulbs outshined the stock halogen low beams with a brighter and wider spread, improving visibility without compromising safety. The road was better lit, and signs, pedestrians, and obstacles were easier to spot.
High Beam Performance: When switched to the high beams, the LS Plus LED bulbs took performance to the next level. The high beams provided increased coverage with a much wider and longer throw, illuminating the road ahead with a daylight-like glow, far surpassing the reach of the stock halogen high beams.
Unmatched Brightness and Performance:
The Lasfit LS Plus LED headlights are designed to provide 13,000LM per set, offering unparalleled brightness for maximum road visibility. These headlights are significantly brighter than traditional halogen bulbs, ensuring better clarity and safety during nighttime or low-visibility driving.
1.Perfect Beam Pattern:
2.Advanced Thermal Management:
3.Proven Reliability:
Upgrading to Lasfit LED headlights is a must for Jeep Gladiator owners who want to improve their nighttime driving experience. Here’s why it’s an essential upgrade:
This straightforward upgrade offers exceptional value by improving both visibility and the appearance of your Gladiator. For owners who want to enhance their night driving experience without the high cost of factory assembly replacement, Lasfit LED headlights provide the perfect solution.