The headlight installation problem of Hyundai Veloster is a pain point that troubles many car owners. The diversity of H7 bulbs make it difficult to complete plug-and-play operations. Many car owners have to endure gradually dimming headlights.
LASFIT developed custom-made H7 LED headlight bulbs for Hyundai Veloster, direct plug and play, no need to install other retainer adapters. In this blog, we show you how to install these new LED headlight bulbs on 2016 Hyundai Veloster, and how they are working. We also replaced the stock turn signal light brake light and backup light to LED bulbs, a huge difference.
Hyundai Veloster LED Replacement List
Low Beam Light: Pro-HK6
(Stock halogen bulb size: H7) 60w/set, 6000lm/set, 6000k crystal white. 400% brighter than halogen. Huge improvement than the stock bulb. Perfect Beam Pattern. No dark spot, and no issues with blinding oncoming traffic. Also, it fits perfectly even allows the dust cap to tighter like factory.
Super easy installation means Pro-HK6 allow you to have a simple and fast within 10-15 minutes. No error code and no flickering. No need any extra retainer adapter or parts.
When you get your hands on Pro-HK6, you will find it so much more convenient compared to a universal H7 bulb with an adapter combination. All you need to do is remove the old halogen bulb and plug in the new Lasfit Pro-HK6 LED bulb. We made it simple, the way it should have always been.
High Beam Light: LAplus 9005
(Stock halogen bulb size: 9005) 9005 is a common bulb size for headlights. In this blog we will use Lasfit LAplus series 9005 to show the installation. They are built without an external driver directly plug and play. New cooling system with a unique ball-bearing fan for heat dissipation, and upgraded LED clip to ensure ultra-high luminous efficiency.
Front Turn Signal Light & Brake Light: T-1157A/T-1157R
(Stock halogen bulb size: 2357)28W/bulb, 2600LM/bulb. CANBUS system can prevent 95% hyper flash and error warning. No need to add extra resistors or parts anymore. They are designed to directly plug and play. Depending on the position and function, you should choose amber for front turn signal lights and red for brake light.
Rear Turn Signal Light: T-1156A
(Stock halogen bulb size: 1156A) LASFIT T series, which is specially designed for turn signals. As we know, almost all of LED lights in the market require the load resistor if installing on turn signals. The T series LED bulb is built-in load resistor, anti hyper flash, error-free.
Trunk Light & Dome Light: 28MM
(Stock halogen bulb size: DE3175) 28mm LED festoon light bulbs. Using high power 3030 SMD LED chips, extremely 6000K white light. That's enough to light up your car. Build-in CANBUS decoder, don't cause "lamp out" errors in MOST applications. Fit perfectly in the same light housing as your original incandescent bulbs, for plug and play installation. The bulb body is slim, sleek, and incredibly compact to stay out of the way when plugged in.
Map Light & License Plate Light: L-T10
(Map Light stock halogen bulb size: 175 & License plate light stock halogen bulb size: 2825) 800LM/set, 6000K pure white. 3 high-power 3030 SMD LED chips, top and one on each side, much brighter than OEM halogen bulbs. Non-polarity design, no need any modification, just for plug and play installation.
Hyundai Veloster LED Replacement Process
Installation of Low Beam Light
Picture1: Lasfit Pro-HK6
Picture2: Loosen the screw and prepare to remove the front headlamp assembly.
Picture3: Remove the front headlamp assembly.
Picture4: Remove the dust cover.
Picture5: Remove the halogen bulb from the housing.
Picture6: Remove the halogen bulb body from the socket.
Picture7: Insert the LED bulb into the housing.
Picture8: Plug in the power.
Picture9: Put on the dust cover.
Picture10: The standard H7 LED bulb can not be locked in place compared to Pro series.
Installation of High Beam Light
Picture1: Lasfit LAplus 9005
Picture2: Remove the dust cover.
Picture3: Insert the LED bulb into the housing.
Picture4: Plug in the power.
Picture5: Put on the dust cover.
Installation of Front Turn Signal Light
Picture1: Lasfit T-1157A
Picture2: Remove the halogen bulb from the housing.
Picture3: Relpace the halogen bulb with the LED bulb.
Picture4: Insert the LED bulb into the housing.
Picture5: Put on the dust cover.
Installation of Brake Light
Picture1: Lasfit T-1157R
Picture2: Remove 3 screws, then pull out the tail light assembly.
Picture3: Rear light assembly display.
Picture4: Remove the halogen bulb.
Picture5: Replace the halogen bulb with LED bulb.
Picture6: Insert the new LED bulb into the housing.
Picture7: Comparison between the halogen lamp effect and the LED lamp effect.
Installation of Rear Turn Signal Light
Picture1: Lasfit T-1156A
Picture2: Remove the halogen bulb.
Picture3: Replace the halogen bulb with LED bulb.
Picture4: Amber LED rear turn signal brightness display.
Picture5: Amber LED rear turn signal brightness display.
Picture6: Install the assembly back onto the vehicle body.
Installation of Trunk Light
Picture1: Lasfit L-28MM
Picture2: Remove the trunk light from the vehicle.
Picture3: Open the trunk light socket.
Picture4: You can see the halogen bulb in the socket.
Picture5: Lasfit's designed LED bulbs are the same size as halogen bulbs, so there won't be any installation issues.
Picture6: Insert the LED bulb into the socket.
Picture7: Assemble the trunk light socket completely.
Picture8: Plug in the power.
Picture9: Install the trunk light back into the vehicle.
Installation of Map Light
Picture1: Lasfit L-T10B
Picture2: Remove the map light cover.
Picture3: Remove the halogen bulb.
Picture4: Lasfit's designed LED bulbs are the same size as halogen bulbs, so there won't be any installation issues.
Picture5: Insert the LED bulb into the socket.
Picture6: Display of blue map light effect compared to the halogen bulb.
Installation of Dome Light
Picture1: Lasfit L-28MM
Picture2: Remove the dome light cover.
Picture3: Remove the halogen bulb.
Picture4: Lasfit's designed LED bulbs are the same size as halogen bulbs, so there won't be any installation issues.
Picture5: Insert the LED bulb into the socket.
Picture6: Put on the dome light cover in the place.
Installation of License Plate Light
Picture1: Lasfit L-T10
Picture2: Remove the license plate light cover with tools.
Picture3: Disassemble the socket and expose the halogen light body.
Picture4: Remove the halogen bulb.
Picture5: Lasfit's designed LED bulbs are the same size as halogen bulbs, so there won't be any installation issues.
Picture6: Insert the LED bulb into the socket.
Picture7: Display of LED lighting effect.
Picture8: Put on the license plate light cover.
If you have used Lasfit products, we would love to hear about your experience. Your honest reviews and testimonials help us improve and strive to provide the best products and services for all car enthusiasts. Thank you for choosing Lasfit!
