Your Cart is Empty
As car enthusiasts, we know that lighting plays a crucial role in both aesthetics and functionality. However, upgrading the lighting system of your Kona car can be a challenging task due to the H7 bulb it uses. In this article, Lasfit will showcase five LED replacement options that are compatible with the Kona. Among them, the Pro-HK6's customized design provides a perfect solution to the problem of replacing the H7 bulb. We hope these options will help bring a refreshing new look to your Kona.
Low Forward Lighting: Pro-HK6
(Stock halogen bulb size: H7) 60w/set, 6000lm/set, 6000k crystal white. 400% brighter than halogen. Huge improvement than the stock bulb. Perfect Beam Pattern. No dark spot, and no issues with blinding oncoming traffic. Also, it fits perfectly even allows the dust cap to tighter like factory.
Super easy installation means Pro-HK6 allow you to have a simple and fast within 10-15 minutes. No error code and no flickering. No need any extra retainer adapter or parts.
When you get your hands on Pro-HK6, you will find it so much more convenient compared to a universal H7 bulb with an adapter combination. All you need to do is remove the old halogen bulb and plug in the new Lasfit Pro-HK6 LED bulb. We made it simple, the way it should have always been.
Rear Turn Signal Light: T-1156A
(Stock halogen bulb size: 1156) Lasfit T series, which is specially designed for turn signals. As we know, almost all of LED lights in the market require the load resistor if installing on turn signals. The T series LED bulb is built-in load resistor, anti hyper flash, error-free.
Brake Light: L-1157R
(Stock halogen bulb size: 1157) 28W/bulb, 2600LM/bulb. CANBUS system can prevent 95% hyper flash and error warning. No need to add extra resistors or parts anymore. They are designed to directly plug and play. Upgrade function for switchback coming with the brighter mode for turn signal light and the normal mode for DRL/driving indicator.
Rear Side Marker Light & Inner Tail Light: L-T10R
(Stock halogen bulb size: 2825) 800LM/set, 6000K pure white. 3 high-power 3030 SMD LED chips, top and one on each side, much brighter than OEM halogen bulbs. Non-polarity design, no need any modification, just for plug and play installation.
Picture1: Lasfit Pro-HK6
Picture 2: Remove the dust cover.
Picture 3: Remove the halogen bulb from the housing.
Picture 4: Replace the halogen bulb with Pro-HK6.
Picture 5: Insert Pro-HK6 into the housing.
Installation of Rear Turn Signal Light
Picture1: Lasfit T-1157R & L-T10R
Picture2: Remove the tail light assembly.
Picture3: Remove the two halogen bulbs from the assembly.
Picture4: Press the LED into the socket.
Picture5: Insert the LED bulb assembly into the housing and secure it in place.
Picture6: Reinstall the assembly onto the vehicle.
Installation of Inner Tail Light Bulbs
Picture1: Lasfit L-T10R
Picture2: Insert the LED bulb into the socket.
Picture3: Put the LED bulb assembly back in place and secure it completely.
Picture4: Put the cover back in its original position.
If you have used Lasfit products, we would love to hear about your experience. Your honest reviews and testimonials help us improve and strive to provide the best products and services for all car enthusiasts. Thank you for choosing Lasfit!
💭Questions or Comments? Leave them below!
📱Follow us on social media for the latest news and updates.
