$9.99
SKU#:T75
The Lasfit Housing Rubber Dust Cover Seal Cap is designed to keep dust, moisture, random debris, water condensation, and insects out of your housing.
Without an effective dust cover the inside of your housing would get extremely dirty, and eventually it would negatively affect your light beam. You always want to keep all the lights working perfectly.
The Lasfit Housing Rubber Dust Cover Seal Cap functions to replace the original dust seal cap when it no longer fits. That usually occurs when you switch to LED bulbs.
Our dust cover is made from durable rubber, which won’t harden/ crack over time from frequent hot & cold temperature changes.
The top 2 OEM vehicle housings dust covers are the hard plastic ‘twist-on,’ and the soft rubber ‘push-on’ style dust cover.
If your housing has an OEM dust cover, it's often necessary to remove the dust cover permanently, because of fitment issues, or modify it to allow the new bulb to fit properly with the dust cover.
You can make things easier and buy a new dust cover. That’s what we offer right here at Lasfit. Get in contact with us if you’re not 100% sure which rubber dust cover size is correct for your vehicle.
Note: Before purchase, please measure the size of your housing's rear flange.
We’ve developed 10 different sizes of dust covers as a replacement for your OEM unit that no longer fits.
This is not one size fits all.
They’re universal for various applications as long as you order the correct size. Each size is not guaranteed to fit all applications.
Please verify the diameter of your factory dust cover. Compare it with the sizes we offer.
They will work and allow you to use an LED bulb easily if you select the correct size.
Size: 55mm/ 65mm/ 70mm/ 75mm/ 80mm/ 85mm/ 90mm/ 95mm/ 100mm/ 105mm
Usage: Replace OEM Dust Cover
Quantity: 1 Pair
Installation: ‘Twist-on’ Style/ ‘Push-on’ Style
The rubber dust covers were difficult getting to stay on. They are meant to sit on the edge of the ring where the original screw on cap fit.
So far the LED lights seem really great/bright. I found an aftermarket solution on eBay for the dust cover closer to the original screw on cap that will accept led bulbs (still waiting for delivery, fingers crossed).
Hello Jim,
We do appreciate that you could contact us about your trouble after installation.
According to the GLE350 owners' feedback, most of them reported that the 105mm dust cover can be pressed, and then attached around the outer of the factory housing.
However, a few did experience the installation issue due to the narrow space in low beam housing.
Considering you already ordered the new ones from eBay, we will directly refund these dust covers, and you don't need to return them.
Usually it takes about 2-5 business days to appear the refund in your payment account.
Feel free to email back to customer support email cs@lasfit.com if you need any further support.
Sincerely,
Lasfit Customer Support Team
Great lights great product
The rubber dust covers were difficult getting to stay on. They are meant to sit on the edge of the ring where the original screw on cap fit.
So far the LED lights seem really great/bright. I found an aftermarket solution on eBay for the dust cover closer to the original screw on cap that will accept led bulbs (still waiting for delivery, fingers crossed).
Hello Jim,
We do appreciate that you could contact us about your trouble after installation.
According to the GLE350 owners' feedback, most of them reported that the 105mm dust cover can be pressed, and then attached around the outer of the factory housing.
However, a few did experience the installation issue due to the narrow space in low beam housing.
Considering you already ordered the new ones from eBay, we will directly refund these dust covers, and you don't need to return them.
Usually it takes about 2-5 business days to appear the refund in your payment account.
Feel free to email back to customer support email cs@lasfit.com if you need any further support.
Sincerely,
Lasfit Customer Support Team
Great lights great product
The rubber dust covers were difficult getting to stay on. They are meant to sit on the edge of the ring where the original screw on cap fit.
So far the LED lights seem really great/bright. I found an aftermarket solution on eBay for the dust cover closer to the original screw on cap that will accept led bulbs (still waiting for delivery, fingers crossed).
Hello Jim,
We do appreciate that you could contact us about your trouble after installation.
According to the GLE350 owners' feedback, most of them reported that the 105mm dust cover can be pressed, and then attached around the outer of the factory housing.
However, a few did experience the installation issue due to the narrow space in low beam housing.
Considering you already ordered the new ones from eBay, we will directly refund these dust covers, and you don't need to return them.
Usually it takes about 2-5 business days to appear the refund in your payment account.
Feel free to email back to customer support email cs@lasfit.com if you need any further support.
Sincerely,
Lasfit Customer Support Team
Great lights great product
"Please use product finder below to find your fit."