Some Vehicles Should Need Aftermarket Adapter/Retainer Clip For some vehicles especially Mercedes-Benz, Volkswagen, BMW, Hyundai, and Kia, they'll need an extra retainer adapter for the LED bulbs to be mounted into the housing. If you have one of these vehicles, find your fit by checking our custom H7 LED replacement list.
If you could not find your fit, please contact us to get the correct retainer adapter. If you have ever bought aftermarket LED light bulbs, you may probably find that the aftermarket bulbs are not as bright as they advertised, the beam pattern could not be adjusted with barely noticeable, or even hard to install with the big cooling fan back of the LED bulbs. To help the customer get quality lights and improve the experience on the LED bulbs, LASFIT designs a new version bulb which is called LS plus series.
But What’s LS Plus Series? The Top series LED bulbs in all LASFIT 6 different series. The brightest light output. The newest technology and design. The best light definition with the custom adapter to fit different light assembly. Ultra-high luminous efficiency. Everything you can imagine is all upgraded to this new LED bulb which is powerful enough to be called LS plus series.
Top Features of LS Plus Series H7 LED Bulbs (Package of 2 Bulbs)
500% Brighter Than Halogen. Ultra-High Luminous Efficiency. Most LED bulbs with high wattage and lumen tend to be dimmer than the moment they light up if the bulb is turned on for a while. The aftermarket bulbs are not as bright as they advertised. With far-reaching research and test over and over again on the LED bulbs, LASFIT LS plus series bulbs come out with ultra-high luminous efficiency. Upgrading those bulbs on your vehicle, you will get a continuous powerful and xenon white light.
360° Adjustable Mode It means the mounting collar is adjustable. It's softly suitable for different light housing with different angles and the light pattern could be easily adjusted and looks just like a halogen one but is brighter and clearer in an LED platform. The beam pattern is set correctly by default but it’s free to adjust by rotating the cooling fan. There are zero dark spots and the pattern is focused to near perfection. *Due to the 360 degrees adjustable design, the mounting base can detach from the bulb.
Instant Lighting for Any Conditions The LED lights coming with two slices of 0.8mm copper substrates combing one 2.0mm copper pipe provide the 2 to 3 times faster thermal efficiency than the traditional copper substrates which means you will get instant lighting for any conditions.
Dual Ball Design. More Stable. Last Longer The efficient cooling system, 40MM dual ball design cooling fan combined with 42MM heat dissipation system, ensures super cooling ability and highly efficient heat dissipation even in a long-time driving. You won’t get the bulb dead or dim in a short time. They’re more stable than the aftermarket LED bulbs than you have ever seen. The lifespan is far more than 30000 hours.
Even More Cool and Safe Features -With dual ball cooling fan design and 42mm heat dissipation system surrounded, the temperature of the whole kit keeps around 42 ℃. You won’t get hurt by touching the bulbs by accident. Zero risks about the overheat to damage the assembly. -Bright & xenon white light: 6000K for drivers who want to increase visibility and a fresh new look on your car.
Tech Specs
Package Include: Package of 2 bulbs Bulb Size: H7 Light Mode: Single Beam Usage: LED Bulbs External/ Internal Driver: External Light Power: 90W/set (45W/bulb) Luminous Flux: 9000LM/set (4500LM/bulb) Voltage: DC 9-16 Color Temperature: Bright White 6,000K Operating Temperature: -40-80 Degree Celsius Lifespan: Over 30,000 hours Certification: IP67 Full Sealed Waterproof, CE, RoHS
Most Honest Policy
2-year hassle-free warranty 45 days fast return/ money-back guarantee. Lifetime professional customer service Offline quick telephone support Physical store experience. *Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged.
Installation Guide
Step 1/ Remove the light and mounting plate from the assembly; Step 2/ Attach the LED bulb adapter to the mounting plate, put it back on the led kit. Step 3/ Insert the LED bulb into the light housing with two rings fixed well. Step 4/ Rotate and lock the bulb, adjust the LED chips facing side to side, 3 to 9 o’clock orientation (Not up and down). If the LED light bulb doesn’t light up after installation, simply flip the plug around and reconnect. Making a positive match with negative.
Installation Video
Notice Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
Application: HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE. Note: This usage regulation is not unique to Lasfit bulbs. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.
DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA) HOMOLOGATION ECE: NO
Great product. Bought lights for both my trucks and have no issues
L
Levi Yazzie
2009 VW Rabbit
-1 bulb needed a little clocking adjustment to match the other side.
-The metal retaining clip needed bending to secure the loose bulb better to the headlight housing.
-After all was said and done, the check light icon on the dash came on. It's not until you turn the bulbs on for more than 4 seconds does the icon turn off. This happens every time the car is started. If you don't turn the bulbs on for longer than 4 seconds, then the icon stays on. Very annoying.
In conclusion, these problems are not what I expect for the $119 dollars I paid.
Hello Levi,
We do appreciate that you could contact us about your trouble after installation.
For a 2009 VW Rabbit, it has a stock metal adapter mounted on the factory connector to lock into the place, and the LSplusH7 LED bulbs you have bought don't come with an adapter, so you’ll need the aftermarket adapter for these LEDs, that's the reason why these LED bulbs are hard to install without the aftermarket adapter.
We have listed the TK001 adapter for your vehicle on our website, you might have not noticed it when purchasing, here is the link:https://www.lasfit.com/products/2x-h7-led-headlight-bulb-holder-adapter-retainer-for-mercedes-benz-vw-nissan
For some vehicles, such as VW, Dodge, and Jeep, the computer will tell the LED bulb's power draw is lower than the stock halogen bulb, so it throws a code.
This issue will happen on all the LED bulbs in the market and the canbus decoder can fix that issue.
Please don't worry, we will send you the TK001 adapters and decoder right away.
By the way, we carry the custom H7 LED bulbs, which combine the adapter with the LED kit and are easy to install, if you want to try these, we could help you to exchange them, here is the link: https://www.lasfit.com/products/pro-series-h7-led-headlight-bulb-w-retainer-adapter-for-vw-mercedes-benz
We also reached out to you through our customer support email
cs@lasfit.com to follow up.
Look forward to hearing from you, thanks.
Sincerely,
Lasfit Customer Support Team
G
Giuseppe Bonanno
Great lighting
Hello Giuseppe,
Thank you so much for sharing your product review.
Your review mentioned that the product has very great, somehow it shows a 1-star review, we're wondering if you click it by mistake?
Feel free to email back to customer support email cs@lasfit.com if you have any further questions.
Sincerely,
Lasfit Customer Support Team
P
Phillip Clement
2019 TRD off road 4Runner
Perfect, thanks for all the help making this order correct.
R
R.E.
2014 Subaru Outback
Love the quality of these lights. If you know anything about the outback they were a pain to install just like any other headlight but worth it since this will be the last time you have to worry about these headlights burning out. I did find it easier to remove the entire headlight housing in order get the fit correct but it was worth it in the long run.
Great product. Bought lights for both my trucks and have no issues
L
Levi Yazzie
2009 VW Rabbit
-1 bulb needed a little clocking adjustment to match the other side.
-The metal retaining clip needed bending to secure the loose bulb better to the headlight housing.
-After all was said and done, the check light icon on the dash came on. It's not until you turn the bulbs on for more than 4 seconds does the icon turn off. This happens every time the car is started. If you don't turn the bulbs on for longer than 4 seconds, then the icon stays on. Very annoying.
In conclusion, these problems are not what I expect for the $119 dollars I paid.
Hello Levi,
We do appreciate that you could contact us about your trouble after installation.
For a 2009 VW Rabbit, it has a stock metal adapter mounted on the factory connector to lock into the place, and the LSplusH7 LED bulbs you have bought don't come with an adapter, so you’ll need the aftermarket adapter for these LEDs, that's the reason why these LED bulbs are hard to install without the aftermarket adapter.
We have listed the TK001 adapter for your vehicle on our website, you might have not noticed it when purchasing, here is the link:https://www.lasfit.com/products/2x-h7-led-headlight-bulb-holder-adapter-retainer-for-mercedes-benz-vw-nissan
For some vehicles, such as VW, Dodge, and Jeep, the computer will tell the LED bulb's power draw is lower than the stock halogen bulb, so it throws a code.
This issue will happen on all the LED bulbs in the market and the canbus decoder can fix that issue.
Please don't worry, we will send you the TK001 adapters and decoder right away.
By the way, we carry the custom H7 LED bulbs, which combine the adapter with the LED kit and are easy to install, if you want to try these, we could help you to exchange them, here is the link: https://www.lasfit.com/products/pro-series-h7-led-headlight-bulb-w-retainer-adapter-for-vw-mercedes-benz
We also reached out to you through our customer support email
cs@lasfit.com to follow up.
Look forward to hearing from you, thanks.
Sincerely,
Lasfit Customer Support Team
G
Giuseppe Bonanno
Great lighting
Hello Giuseppe,
Thank you so much for sharing your product review.
Your review mentioned that the product has very great, somehow it shows a 1-star review, we're wondering if you click it by mistake?
Feel free to email back to customer support email cs@lasfit.com if you have any further questions.
Sincerely,
Lasfit Customer Support Team
P
Phillip Clement
2019 TRD off road 4Runner
Perfect, thanks for all the help making this order correct.
R
R.E.
2014 Subaru Outback
Love the quality of these lights. If you know anything about the outback they were a pain to install just like any other headlight but worth it since this will be the last time you have to worry about these headlights burning out. I did find it easier to remove the entire headlight housing in order get the fit correct but it was worth it in the long run.
Please confirm shipping address and billing address.The shipping address should be a physical address, weDO NOT ship to P.O. box address.
Handling Time Once the order was placed please allow us 1-2 business days for packing and shipping, checking the order information is a very important step to build a better shopping experience. Special Case: For the transaction paid by using a PayPal eCheck, the payment will be completed within 3-6 business days. The handing and shipping should be started up as soon as the payment to be successful.
Shipping Time The order will be shipped on the same day or next business day, especially for the order on Friday or weekend, it would be shipped on the next business day. Lasfit website orders were being supported by USPS, UPS, FedEx.
International Shipping/ Postage We could not offer International shipping service at this moment.
Warranty Policy
If you get any warranty-related trouble with Lasfit brand, you could contact Lasfit directly for professional and quick support, we'll help you solve the issue for 100% sure! We also take care of all quality-related issues with a replacement or full refund including any return shipping costs. The products purchased from one of our retailers, we do not provide support related to after-sales. Please contact the retailer directly for specific guidance on their warranty process. Unauthorized reselling of Lasfit products is strictly prohibited and we can't honor the warranty if purchasing from the unauthorized reseller.
Exchange & Return Policy
When you purchase products from Lasfit official site, you agree to our policy about returns, exchanges, and refunds as outlined. More details please check out exchange & return policy.
Great product. Bought lights for both my trucks and have no issues
L
Levi Yazzie
2009 VW Rabbit
-1 bulb needed a little clocking adjustment to match the other side.
-The metal retaining clip needed bending to secure the loose bulb better to the headlight housing.
-After all was said and done, the check light icon on the dash came on. It's not until you turn the bulbs on for more than 4 seconds does the icon turn off. This happens every time the car is started. If you don't turn the bulbs on for longer than 4 seconds, then the icon stays on. Very annoying.
In conclusion, these problems are not what I expect for the $119 dollars I paid.
Hello Levi,
We do appreciate that you could contact us about your trouble after installation.
For a 2009 VW Rabbit, it has a stock metal adapter mounted on the factory connector to lock into the place, and the LSplusH7 LED bulbs you have bought don't come with an adapter, so you’ll need the aftermarket adapter for these LEDs, that's the reason why these LED bulbs are hard to install without the aftermarket adapter.
We have listed the TK001 adapter for your vehicle on our website, you might have not noticed it when purchasing, here is the link:https://www.lasfit.com/products/2x-h7-led-headlight-bulb-holder-adapter-retainer-for-mercedes-benz-vw-nissan
For some vehicles, such as VW, Dodge, and Jeep, the computer will tell the LED bulb's power draw is lower than the stock halogen bulb, so it throws a code.
This issue will happen on all the LED bulbs in the market and the canbus decoder can fix that issue.
Please don't worry, we will send you the TK001 adapters and decoder right away.
By the way, we carry the custom H7 LED bulbs, which combine the adapter with the LED kit and are easy to install, if you want to try these, we could help you to exchange them, here is the link: https://www.lasfit.com/products/pro-series-h7-led-headlight-bulb-w-retainer-adapter-for-vw-mercedes-benz
We also reached out to you through our customer support email
cs@lasfit.com to follow up.
Look forward to hearing from you, thanks.
Sincerely,
Lasfit Customer Support Team
G
Giuseppe Bonanno
Great lighting
Hello Giuseppe,
Thank you so much for sharing your product review.
Your review mentioned that the product has very great, somehow it shows a 1-star review, we're wondering if you click it by mistake?
Feel free to email back to customer support email cs@lasfit.com if you have any further questions.
Sincerely,
Lasfit Customer Support Team
P
Phillip Clement
2019 TRD off road 4Runner
Perfect, thanks for all the help making this order correct.
R
R.E.
2014 Subaru Outback
Love the quality of these lights. If you know anything about the outback they were a pain to install just like any other headlight but worth it since this will be the last time you have to worry about these headlights burning out. I did find it easier to remove the entire headlight housing in order get the fit correct but it was worth it in the long run.
![[CC Version] Wireless Car Charger Phone Holder 15W Qi Fast Charging Dash Windshield Air Vent Mount](http://cdn.shopify.com/s/files/1/1827/4457/products/CCVersion_fastchargercarphonemount_1400x.jpg?v=1656062165)
