$55.99
SKU#:T-3157A
You Save 20% ($14.00)Important Notice:
• Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
• Please check the second picture to check if you need this bulb with CK SOCKET.
• This product still has hyper flash on 1997-2013 Chevrolet Corvette. If you have one of these vehicles, please do not purchase this item.
NOTE:
1. This product is not compatible with the below vehicles, if you have one of these vehicles, please don't buy this product.
• 1997-2013 Chevrolet Corvette
• 2004-2005 Chevrolet Silverado
• 2005-2015 Toyota Tacoma
• 2007-2017 Toyota Tundra
• 2002-2006 Toyota Camry
• 2012-2014 Dodge Charger
• 2014-2018 Ram
• 2015-2017 Dodge Durango
2. NOT compatible if the bulb is all in one for the rear turn signal and brake lights.
3. Besides, 3157 bulbs have CK and Non-CK circuit, some vehicles may require CK specific sockets. If you are not sure, please click here to find which bulb you need. If the bulbs can't work properly, please feel free to contact us to exchange the right bulbs.
Built-in CANBUS is Very Important for LED Turn Signal Light
We know, most LEDs may cause hyper flash & error code when they are replaced on the turn signal lights due to LEDs low-consumption, energy-saving performance. If there isn't enough resistor value to meet car computer, extra resistor decoders will be needed.
Now, there is a good solution to abandon annoying resistor decoders. Our new version CANBUS 3157 will meet your need. LASFIT is the first brand on the market to publish built-in CANBUS Amber LED turn signal lights, when most products of LED are not canbus error free on the automotive aftermarket. We are confident that these bulbs would give you an extraordinary driving experience!
CANBUS system can prevent 95% hyper flash and error warning. No need to add extra resistors or parts anymore. They are designed to directly plug and play.
Dual Brightness Function
Upgrade function for switchback coming with the brighter mode for turn signal light and the normal mode for DRL/driving indicator.
Intelligent Temperature Control (ITC)
Excellent Intelligent Temperature Control system will protect bulbs against excessive current and overheating and ensure a longer lifespan.
Safety Protection
Built-in MINI fuses to protect the bulbs and your cars against the instantaneous high current. Safer installation and use.
Worry-Free Warranty
We provide 45 days money-back guarantee, 1-year hassle free warranty, friendly customer service, and U.S. local customer support.
Product: T-3157A
Fit Size: 3157 / 3157A / 3057 / 3057A / 3457 / 3457A / 4057 / 4157 / 4157NA
Installation Position: Turn Signal Light
Wattage: 28W/bulb(max)
Lumens: 2600LM/bulb(max)
Color: Bright Amber / Dim Amber
LED Chips: 40pcs SMD 3030 LED Chips
Socket: standard socket and CK socket
1. These bulbs are polarity sensitive. If the LED does not light up after inserting, simply remove it, flip the direction and reinstall.
2. Since these bulbs built-in Intelligent Temperature Control, if you use for a long time (a few vehicles maybe 2-5 minutes, it depends on year/make/model and temperature) may happen hyper flash, please turn off and cool 1-2 minutes, they will work normally again.
3. Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged.
These blinkers are super bright. I have no issues with other drivers knowing that I’m turning when my lights are on anymore. They are literally blinding if you lock/unlock in the dark. Best part is last dot stands behind their product and if you have any issues they help you out right away! Also lifetime warranty!
These led lights are amazing. Only issue is that one was defective when it arrived, but I contacted customer service and they took care of me. The new bulbs work very well and are remarkable bright
I am so glad I found LasFit and the LED bulbs that they offer. I have tried 3 different companies over the last 2 years that have all said that their bulbs would fit my 2012 Chevrolet Silverado 3500HD 6.6L Cummings Diesel. The first set of LEDs caused a hyper-flash issue. I spoke with their customer service and was instructed that the bulbs needed in line resistors to fix the problem. I bought and installed the resistors as instructed and the problem continued. After 6 mo of communicating back and forth with their company, the lights never properly worked.
I then found a second company who advertised that their bulbs would fit the truck and would "probably not" need the resistors but if they did the resistors were included with the bulbs. I Uninstalled the other bulbs, resistors, and re-installed the new bulbs and resistors. The same problem persisted. I contacted the second company's customer service, went through the same steps that they suggested, and this time even got my mechanic involved to make sure all wires, resistors, and connections were properly installed.
After multiple hours of diagnostics, bulb changes, wiring, resistor changes, and configurations (all following the LED manufacturer's instructions), the hyperflash continued. I thought I was stuck with the issue or would have to go back to halogen bulbs. The truck is all LED except for the turn signals at this point. My mechanic spoke with a friend of his at GM and was told to remove the LEDs and resistors due to it causing an issue with the BCM. This issue could possibly lead to the BCM failing or needing to be replaced costing a lot of money in repairs. His friend told him of these new Lasfit LED bulbs with the resistors built in that should fix the hyperflash problem.
Reluctantly, I ordered the LED bulbs from the LasFit website for the tail lights (red) and turn signals(yellow). We removed all the old LEDs and resistors, installed the new LEDs from Lasfit and hoped for the best, but expected the worst. What an amazing product!!!! We still have original wiring with no resistors and the hyperflash is GONE!! These lights are also the brightest LEDs i've ever seen. They are awesome. These lights really completed the transformation for the truck to all LED. I am so glad I was told about these lights and am amazed at their quality, brightness, and most importantly, that they work with no extra wiring or resistors. I will definitely be ordering from them again for my other vehicles when I convert them to LED in the future.
they are highly visible at night very bright the customer service is awesome and a good company i had a little problem with one of the sets on my 05 corolla i order the wrong one by mistake send them a email about the problem and they send me the right one and they work perfect now i got them on my 05 corolla and my 18 civic si highly recommend them
Great product and Company Sevice…they stand behind there quality!
These blinkers are super bright. I have no issues with other drivers knowing that I’m turning when my lights are on anymore. They are literally blinding if you lock/unlock in the dark. Best part is last dot stands behind their product and if you have any issues they help you out right away! Also lifetime warranty!
These led lights are amazing. Only issue is that one was defective when it arrived, but I contacted customer service and they took care of me. The new bulbs work very well and are remarkable bright
I am so glad I found LasFit and the LED bulbs that they offer. I have tried 3 different companies over the last 2 years that have all said that their bulbs would fit my 2012 Chevrolet Silverado 3500HD 6.6L Cummings Diesel. The first set of LEDs caused a hyper-flash issue. I spoke with their customer service and was instructed that the bulbs needed in line resistors to fix the problem. I bought and installed the resistors as instructed and the problem continued. After 6 mo of communicating back and forth with their company, the lights never properly worked.
I then found a second company who advertised that their bulbs would fit the truck and would "probably not" need the resistors but if they did the resistors were included with the bulbs. I Uninstalled the other bulbs, resistors, and re-installed the new bulbs and resistors. The same problem persisted. I contacted the second company's customer service, went through the same steps that they suggested, and this time even got my mechanic involved to make sure all wires, resistors, and connections were properly installed.
After multiple hours of diagnostics, bulb changes, wiring, resistor changes, and configurations (all following the LED manufacturer's instructions), the hyperflash continued. I thought I was stuck with the issue or would have to go back to halogen bulbs. The truck is all LED except for the turn signals at this point. My mechanic spoke with a friend of his at GM and was told to remove the LEDs and resistors due to it causing an issue with the BCM. This issue could possibly lead to the BCM failing or needing to be replaced costing a lot of money in repairs. His friend told him of these new Lasfit LED bulbs with the resistors built in that should fix the hyperflash problem.
Reluctantly, I ordered the LED bulbs from the LasFit website for the tail lights (red) and turn signals(yellow). We removed all the old LEDs and resistors, installed the new LEDs from Lasfit and hoped for the best, but expected the worst. What an amazing product!!!! We still have original wiring with no resistors and the hyperflash is GONE!! These lights are also the brightest LEDs i've ever seen. They are awesome. These lights really completed the transformation for the truck to all LED. I am so glad I was told about these lights and am amazed at their quality, brightness, and most importantly, that they work with no extra wiring or resistors. I will definitely be ordering from them again for my other vehicles when I convert them to LED in the future.
they are highly visible at night very bright the customer service is awesome and a good company i had a little problem with one of the sets on my 05 corolla i order the wrong one by mistake send them a email about the problem and they send me the right one and they work perfect now i got them on my 05 corolla and my 18 civic si highly recommend them
Great product and Company Sevice…they stand behind there quality!
These blinkers are super bright. I have no issues with other drivers knowing that I’m turning when my lights are on anymore. They are literally blinding if you lock/unlock in the dark. Best part is last dot stands behind their product and if you have any issues they help you out right away! Also lifetime warranty!
These led lights are amazing. Only issue is that one was defective when it arrived, but I contacted customer service and they took care of me. The new bulbs work very well and are remarkable bright
I am so glad I found LasFit and the LED bulbs that they offer. I have tried 3 different companies over the last 2 years that have all said that their bulbs would fit my 2012 Chevrolet Silverado 3500HD 6.6L Cummings Diesel. The first set of LEDs caused a hyper-flash issue. I spoke with their customer service and was instructed that the bulbs needed in line resistors to fix the problem. I bought and installed the resistors as instructed and the problem continued. After 6 mo of communicating back and forth with their company, the lights never properly worked.
I then found a second company who advertised that their bulbs would fit the truck and would "probably not" need the resistors but if they did the resistors were included with the bulbs. I Uninstalled the other bulbs, resistors, and re-installed the new bulbs and resistors. The same problem persisted. I contacted the second company's customer service, went through the same steps that they suggested, and this time even got my mechanic involved to make sure all wires, resistors, and connections were properly installed.
After multiple hours of diagnostics, bulb changes, wiring, resistor changes, and configurations (all following the LED manufacturer's instructions), the hyperflash continued. I thought I was stuck with the issue or would have to go back to halogen bulbs. The truck is all LED except for the turn signals at this point. My mechanic spoke with a friend of his at GM and was told to remove the LEDs and resistors due to it causing an issue with the BCM. This issue could possibly lead to the BCM failing or needing to be replaced costing a lot of money in repairs. His friend told him of these new Lasfit LED bulbs with the resistors built in that should fix the hyperflash problem.
Reluctantly, I ordered the LED bulbs from the LasFit website for the tail lights (red) and turn signals(yellow). We removed all the old LEDs and resistors, installed the new LEDs from Lasfit and hoped for the best, but expected the worst. What an amazing product!!!! We still have original wiring with no resistors and the hyperflash is GONE!! These lights are also the brightest LEDs i've ever seen. They are awesome. These lights really completed the transformation for the truck to all LED. I am so glad I was told about these lights and am amazed at their quality, brightness, and most importantly, that they work with no extra wiring or resistors. I will definitely be ordering from them again for my other vehicles when I convert them to LED in the future.
they are highly visible at night very bright the customer service is awesome and a good company i had a little problem with one of the sets on my 05 corolla i order the wrong one by mistake send them a email about the problem and they send me the right one and they work perfect now i got them on my 05 corolla and my 18 civic si highly recommend them
Great product and Company Sevice…they stand behind there quality!
"Please use product finder below to find your fit."