Pro-HK5: Low forward lighting for 2015-2018 Kia Sedona Pro-HK7: High forward lighting for 2015-2018 Kia Sedona Pro-HK6: Low forward lighting for 2019-2021 Kia Sedona LAplus9005: High forward lighting for 2019-2021 Kia Sedona Reverse light: 921 (LASFIT L-T15) License plate light: 168 (LASFIT L-T10) Front turn signal light: 2357 (LASFIT T-1157D) Rear turn signal light: T-1157R Trunk light: L-31MM Dome light: L-36MM
Custom H7 LED bulbs w/ retainer adapter: custom-design, plug and play
If you have tried to replace your halogen bulbs to LED bulbs or HID bulbs, you should know a retainer adapter is required. LASFIT re-designed a custom H7 LED bulb to fit , for Kia Sedona 2015 2016 2017 2018 2019 2020 2021. All-in-one design, no need to connect other retainers/holders / adapters.
Actually, the stock halogen bulb is regular H7 bulb, but it comes with a black retainer, which locks the H7 halogen bulb on housing socket. So, if you want to change halogen h7 bulbs to LED or HID, the retainer adapter is needed. The universal retainer adapter is available on the market but we’re told the universal adapter is hard to lock the h7 LED bulb and get an awful beam pattern.
About LASFIT's custom-made H7 LED bulb: the LED adapter and the mount base are integrated, all in one design, and firmly locked in position. No longer needing to worry about it falling out. It is a direct replacement to the OEM bulb; just plug and play as shown in the video.
Truly 30W 3000LM 6000K per bulb, Clear Beam Pattern, No Blinding, No Dark Spot. Keep your safe day and night.
Are you still suffering from dim halogen bulbs? Some Kia Sedona owners complain that the factory halogens are very dim, they can't see down the road when they are driving on the dark roads. They have a difficult time just finding the entrance to their driveway. So, they are afraid to drive at night because it's so dangerous. Actually, you just need to upgrade the original halogen bulb to LEDs, you'll get totally different experience. Not only does it improve visibility, you no need to worry about the dark road at night, but also gives your car a new look.
This LED bulb is electricity saving light, has low power, big lumens(flux beam), maximizes lighting output. 6000K cool crystal white color.
The LED chips are perfectly positioned to hit the housing(reflector or projector) in the correct spot. This ensures a great beam pattern with a sharp cutoff line. There’s no dark spot and no issues with blinding oncoming traffic.
ITCS Tech & Advanced Cooling System Keep LED bulbs Steady Running.
LASFIT LAplus series are built-in ITCS Tech(Intelligent Temperature Control System) and have dual ball cooling fans. When an LED bulb overheats after working for a period of time, the ITCS keeps the power in a proper range, and cooling fan accelerates the speed of heat dissipation, which makes LED bulbs last longer.
Take A Look At Our Customer Friendly Warranty
If you find our LASFIT LED lights didn't work for your specific vehicle, let us know and we'll try our best to fix it, warranty it, or offer you a refund.
We provide 45 days money-back guarantee. 1-Year hassle free warranty. American Customer Support. US LOCAL SUPPORT in the state of California. After-sale Service Includes:
TRULY Easy Exchange & Return. RSL provided for Any Quality Issue. Installation Guide - Professional & fast response to solve any confusion or fitment issue.
Fog Light
For 2015-2018 Kia Sedona, fog lights have two types: H11 and 9006 We don't put the fog light in the option for purchase. If you need LED fog lights, please check the stock fog light bulb size.
Front & Rear turn signal light bulbs
LASFIT T series, which is specially designed for turn signals. As we know, almost all LED lights in the market require a load resistor if installed on turn signals. The T series LED bulb is built-in load resistor, anti hyper flash, error-free.
Reverse light bulbs
T15, white color, 6000K. Built-in Constant Current IC driver ensures reliability even with voltage fluctuations, much safer driving on the way. Equipped with CANBUS system, will not cause "lamp out" errors in MOST applications.
License plate light bulbs
T10, 6000K cool white color. Using high power 3030 SMD LED Chips, 400lm(raw, each bulb), 6000K Xenon White extremely bright output. Definitely different from the yellowish stock lamp.
Dome lights / Trunk lights
LASFIT LED festoon light bulbs. Using high power 3030 SMD LED chips, extremely 6000K crips white light. That's enough to light up your car. Build-in CANBUS decoder, don't cause "lamp out" errors in MOST applications. Fit perfectly in the same light housing as your original incandescent bulbs, for plug and play installation. The bulb body is slim, sleek, and incredibly compact to stay out of the way when plugged in.
Notice:
Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
Application: HID and LED bulbs are street legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in Snowmobile and ATV headlights and off-road racing use only auxiliary or forward lighting. International street legality varies by country. For detailed clarification on street use, CLICK HERE. Note: This usage regulation is not unique to Lasfit bulbs. All LED and HID bulbs from all other brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.
DOT/SAE/FVMSS108: NO (NOT STREET LEGAL IN HEADLIGHTS IN USA) HOMOLOGATION ECE: NO
Only way to get these to fit in the housing for a 2015 Kia Sedona was to pop off the original casing the plug goes into and to plug directly into each other and electrical tape. That’s the only way they fit with dust cap on. Note. High beams don’t fit tight. You have to put in and pull out bulb slightly and turn it so it’s upright and then push back in.
So far they are super bright compared to the halogens.
Hello Jeffrey,
Thank you so much for sharing your product review.
Here is the installation steps for the HK5 low beams:
1. Remove the retainer adapter from LED bulb;
2. Lock the retainer adapter on housing socket;
3.Insert the LED bulb into the housing;
4.Twist the LED bulb to right side and lock the LED bulb.
5.Connnect the power plug.
For dust cap issue, we are wonering if there is any drier in the dust cap.
If so, we suggest you take the drier out, and then the dust cap can be put back into place.
As for the HK7 high beams, since it is our first time meeting this issue, it would be appreciated if you can send us a short video, so we could check what's going on and provide a solution.
We also reached out to you through our customer support email cs@lasfit.com to follow up.
Look forward to hearing from you, thanks.
Sincerely,
Lasfit Customer Support Team
M
M.P.
2016 Kia Sedona EX
Previously tried a different much cheaper brand and had bad results in several ways. So I decided it was time to do it right.
The adapter rings snapped right in. (One of them a little bit to literally) and the lights were easy to insert and adjust. The output seems much brighter and more even, with less dark spots and a clean cut off in the projector light housing.
The customer service team was extremely quick and polite and helped me with a user error issue I had while installing the adapter ring and got my squared away!
Not only would i recommend Lasfit I would like to thank and congratulate Lasfit on their awesome customer service and sales support team.
C
CHEVYSIL1500
Finally, Great LED lights for 2016 Kia Sedona
I have all Lasfit LED lights on My Silverado so Naturally I had to add Lasfit LED to my wife’s Kia Sedona. Besides the Kia being slightly difficult to do any type of repairs on, the LED install takes about 20 minutes. The plug and play functionality with lasfit always keeps me coming back for more! Thanks lasfit team for another quality product! If you are thinking of buying, make the purchase now. You will not regret it!
D
Daniel
Perfect fit for 2018 Kia Sedona
Perfect fit for 2018 Kia Sedona and customer support was fantastic.
Sharp cut-off and will not blind oncoming traffic.
G
G.B.
Exact Headlight Upgrade I was looking for
I’m incredibly happy with the quality of the LED headlights (low beams). The install videos were extremely helpful for both how to properly remove the two connectors from the halogen brackets, as well as how the LED is supposed to line up inside so the light refracts properly. I did this install without removing the headlights from the vehicle, which was tough with big hands but still possible. Took about 30 minutes all said and done for me, but I have experience doing this kind of install. Can confirm these will not be blinding oncoming traffic at night, and you will actually be able to see the road and in front of you like you’d expect your halogens to do, but they don’t, and these LEDs do 😎👌
Only way to get these to fit in the housing for a 2015 Kia Sedona was to pop off the original casing the plug goes into and to plug directly into each other and electrical tape. That’s the only way they fit with dust cap on. Note. High beams don’t fit tight. You have to put in and pull out bulb slightly and turn it so it’s upright and then push back in.
So far they are super bright compared to the halogens.
Hello Jeffrey,
Thank you so much for sharing your product review.
Here is the installation steps for the HK5 low beams:
1. Remove the retainer adapter from LED bulb;
2. Lock the retainer adapter on housing socket;
3.Insert the LED bulb into the housing;
4.Twist the LED bulb to right side and lock the LED bulb.
5.Connnect the power plug.
For dust cap issue, we are wonering if there is any drier in the dust cap.
If so, we suggest you take the drier out, and then the dust cap can be put back into place.
As for the HK7 high beams, since it is our first time meeting this issue, it would be appreciated if you can send us a short video, so we could check what's going on and provide a solution.
We also reached out to you through our customer support email cs@lasfit.com to follow up.
Look forward to hearing from you, thanks.
Sincerely,
Lasfit Customer Support Team
M
M.P.
2016 Kia Sedona EX
Previously tried a different much cheaper brand and had bad results in several ways. So I decided it was time to do it right.
The adapter rings snapped right in. (One of them a little bit to literally) and the lights were easy to insert and adjust. The output seems much brighter and more even, with less dark spots and a clean cut off in the projector light housing.
The customer service team was extremely quick and polite and helped me with a user error issue I had while installing the adapter ring and got my squared away!
Not only would i recommend Lasfit I would like to thank and congratulate Lasfit on their awesome customer service and sales support team.
C
CHEVYSIL1500
Finally, Great LED lights for 2016 Kia Sedona
I have all Lasfit LED lights on My Silverado so Naturally I had to add Lasfit LED to my wife’s Kia Sedona. Besides the Kia being slightly difficult to do any type of repairs on, the LED install takes about 20 minutes. The plug and play functionality with lasfit always keeps me coming back for more! Thanks lasfit team for another quality product! If you are thinking of buying, make the purchase now. You will not regret it!
D
Daniel
Perfect fit for 2018 Kia Sedona
Perfect fit for 2018 Kia Sedona and customer support was fantastic.
Sharp cut-off and will not blind oncoming traffic.
G
G.B.
Exact Headlight Upgrade I was looking for
I’m incredibly happy with the quality of the LED headlights (low beams). The install videos were extremely helpful for both how to properly remove the two connectors from the halogen brackets, as well as how the LED is supposed to line up inside so the light refracts properly. I did this install without removing the headlights from the vehicle, which was tough with big hands but still possible. Took about 30 minutes all said and done for me, but I have experience doing this kind of install. Can confirm these will not be blinding oncoming traffic at night, and you will actually be able to see the road and in front of you like you’d expect your halogens to do, but they don’t, and these LEDs do 😎👌
Only way to get these to fit in the housing for a 2015 Kia Sedona was to pop off the original casing the plug goes into and to plug directly into each other and electrical tape. That’s the only way they fit with dust cap on. Note. High beams don’t fit tight. You have to put in and pull out bulb slightly and turn it so it’s upright and then push back in.
So far they are super bright compared to the halogens.
Hello Jeffrey,
Thank you so much for sharing your product review.
Here is the installation steps for the HK5 low beams:
1. Remove the retainer adapter from LED bulb;
2. Lock the retainer adapter on housing socket;
3.Insert the LED bulb into the housing;
4.Twist the LED bulb to right side and lock the LED bulb.
5.Connnect the power plug.
For dust cap issue, we are wonering if there is any drier in the dust cap.
If so, we suggest you take the drier out, and then the dust cap can be put back into place.
As for the HK7 high beams, since it is our first time meeting this issue, it would be appreciated if you can send us a short video, so we could check what's going on and provide a solution.
We also reached out to you through our customer support email cs@lasfit.com to follow up.
Look forward to hearing from you, thanks.
Sincerely,
Lasfit Customer Support Team
M
M.P.
2016 Kia Sedona EX
Previously tried a different much cheaper brand and had bad results in several ways. So I decided it was time to do it right.
The adapter rings snapped right in. (One of them a little bit to literally) and the lights were easy to insert and adjust. The output seems much brighter and more even, with less dark spots and a clean cut off in the projector light housing.
The customer service team was extremely quick and polite and helped me with a user error issue I had while installing the adapter ring and got my squared away!
Not only would i recommend Lasfit I would like to thank and congratulate Lasfit on their awesome customer service and sales support team.
C
CHEVYSIL1500
Finally, Great LED lights for 2016 Kia Sedona
I have all Lasfit LED lights on My Silverado so Naturally I had to add Lasfit LED to my wife’s Kia Sedona. Besides the Kia being slightly difficult to do any type of repairs on, the LED install takes about 20 minutes. The plug and play functionality with lasfit always keeps me coming back for more! Thanks lasfit team for another quality product! If you are thinking of buying, make the purchase now. You will not regret it!
D
Daniel
Perfect fit for 2018 Kia Sedona
Perfect fit for 2018 Kia Sedona and customer support was fantastic.
Sharp cut-off and will not blind oncoming traffic.
G
G.B.
Exact Headlight Upgrade I was looking for
I’m incredibly happy with the quality of the LED headlights (low beams). The install videos were extremely helpful for both how to properly remove the two connectors from the halogen brackets, as well as how the LED is supposed to line up inside so the light refracts properly. I did this install without removing the headlights from the vehicle, which was tough with big hands but still possible. Took about 30 minutes all said and done for me, but I have experience doing this kind of install. Can confirm these will not be blinding oncoming traffic at night, and you will actually be able to see the road and in front of you like you’d expect your halogens to do, but they don’t, and these LEDs do 😎👌
![[CC Version] Wireless Car Charger Phone Holder 15W Qi Fast Charging Dash Windshield Air Vent Mount](http://www.lasfit.com/cdn/shop/products/CCVersion_fastchargercarphonemount_1400x.jpg?v=1656062165)
